CUTTING SOLUTIONS Automatic high production metal cutting machine with a high cut quality in tolerance and squareness, adapt for any kind of solid bars as well as tubes in round, square or rectangular section or profiles. Round tube: from 0 10mm, to 0 100mm (optional: max 0 mm 120); Square tube: from 10 x 10mm, to 100 x 100mm (optional: max 110 x 110); Rectangular: from 10 x 10mm, to 120 x 100mm; Bar: from 0 8mm, to 0 60mm. HEADS TIPE LIGHT CUTTING HEAD ► Vertical cutting descending from above saw head mounted on prismatic guides with possibility of adjusting any possible play between the slides and the head with automatic centralized lubrication. ► Suitable for light alloys (aluminum, brass, copper). ► Blade speed up to 4000 rpm. ► TCT blade. ► Electronic blade protection device which can be adjusted according to needs. ► Blade diameter: min 200 mm - max 350 mm. ► Oil mist blade lubrication. HEAVY CUTTING HEAD ► Vertical cutting descending from above saw head mounted on prismatic guides, with possibility of adjusting any possible play between the slides and the head, with automatic centralized lubrication. ► Suitable for steel, stainless steel, ECOBRASS. ► Composed with hardened and ground helicoidal gears to obtain an high operating rate, without any play or vibration of the saw blade. ► Blade speed from 30rpm to 400rpm with the possibility to mount an inverter to adjust the blade speed while the machine is operating. ► Conventional type blades as well as TIN type ► Worn HSS blade can be re-sharpened. ► Diameter the blade min 0 200 mm - max: 350 mm. ► Oil mist blade lubrication.

MACHINE DEVICES ► CN feeding gripper powered by a servo motor, with a stroke of 1000 mm, with possibility of duplications for longer pieces. ► Feeding gripper speed 1 m/s. ► Manual adjustment on the clamping device according to the diameter or the profile to be cut. ► Pneumatic clamping in both side of the blade. ► Centralized lubrication system for the moving parts. ► Electronic equipment Siemens with Siemens touch screen interface. AUTOMATIC SLOPE LOADER “M” ► Suitable for the following material dimension: ► Round tubes from 0 6mm to 0 90mm. ► Square tubes from 10x10mm to 100x100mm. ► Rectangular...

HEAVY CUTTING HEAD ► Vertical cutting descending from above saw head mounted on prismatic guides, with possibility of adjusting any possible play between the slides and the head, with automatic centralized lubrication. ► Suitable for steel, stainless steel, ECOBRASS. ► Composed with hardened and ground helicoidal gears to obtain an high operating rate, without any play or vibration of the saw blade. ► Blade speed from 30rpm to 400rpm with the possibility to mount an inverter to adjust the blade speed while the machine is operating. ► Conventional type blades as well as TIN type ► Worn HSS blade...

UNLOADING DEVICES UNLOADING BELT T1 ► Automatic unloading belt with one discharge position (one side) plus another one for trim cut and scraps. ► Pneumatic pusher to discharge the pieces. ► Trim cut and scrap goes straight to the end on the belt. ► For pieces up to 1m (possibility to extend the unloading length). UNLOADING BELT T2 ► Automatic unloading belt with two discharge position plus another one for trim cut and scraps. ► Two deflectors controlled by the panel to manage the unloading system. ► Pneumatic pusher to discharge the pieces on both sides. ► Trim cut and scrap goes straight to...