Product Specifications Perforation detection Perforation detector SIMCO^^ static control made Easy! High voltage spark over can be used in a controlled way. A spark over from a special electrode to a ground reference can be detected and evaluated. Perforations in plastic webs can be detected and counted. The Perfomaster provides the hardware and software to generate a controlled spark over, detect this and evaluate the spark over to produce a pulse signal. The pulse signal is available on the output connector and can be used for counting dtected spark-overs and thus perforations. The miniaturised design of the Perfomaster contains the electrode as well as the high voltage source. It is powered by 24 V DC, so no high voltage cable is reguired. Electrodes are standard fitted with three special alloy emitter pins and are detachable for replacement or remote placement. A status LED provides direct system information on the Perfomaster. A green LED signals operation OK. An intermittent red LED signals a perforation detected. Supply voltage and output voltage setting to the Perfomaster can be 1. Directly from the machine f.e. PLC 2. With additional external control kit - Simco-lon Netherlands * Technical specifications Housing material low voltage cable, standard Ml 2 connector Emitter pins special alloy - Green, signal "operation ok" - Red, signal perforation detected Control voltage Technical drawing Perfomaster www.simco-ion.co.uk/our-products/perforation-detection/perfomaster | Perforation detection Perforation detector Perfomaster + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - +