Induction heaters and tools
16Pages

Induction heaters and tools

Table of contents Advantages: Installation and removal of rolling bearings simatherm induction heaters simatherm applications simatherm technical data simatool tools simatool applications Developed to impress professionals: Induction heaters and specialised tools for the perfect handling of rolling bearings Many processes can literally grind to a halt if bearings are not properly installed and lubricated. If it is necessary to replace worn-out bearings and seals, the job must be done efficiently and professionally from the start. simatherm induction heaters and simatool quality tools...

Prevent premature bearing failure Over 60% of premature bearing failures are preventable. simatec supplies unique hardware solutions for the careful installation and removal and automatic lubrication. Contamination from outside Incorrect lubrication Causes of bearing failure Improper installation Over 16% of premature bearing failures are caused by improper installation. The lack of proper tooling and know-how often leads to new bearings being subjected to high levels of stress and subsurface damage. This makes premature bearing failure inevitable. In order to prevent this, the correct...

simatherm induction heaters simatherm – perfect solutions for the clean, efficient installation of rolling bearings With simatherm induction heaters, rolling bearings and other ring-shaped metal parts can be heated in a highly efficient manner. They allow a quick and clean installation and replace conventional heating methods such as heating plates, hot oil baths, open flames and ovens. During the heating process, only the workpiece is heated while the device itself remains cool. simatherm induction heaters can be used for workpieces weighing up to 300 kg. Heating with induction The heating...

Electrical heating plate with temperature control Specially designed for heating multiple small components HPS for workpieces weighing up to 5 kg; HPL for workpieces weighing up to 10 kg Plate surface (WxD) for HPS: 380×180 mm; for HPL: 380×380 mm Also included: 1 pair of protective gloves Available for voltages of 100–115 and 230 V Control range from 50 to 200 °C Induction Heater IH 025 VOLCANO The lightweight portable device with excellent performance The portable induction heater for heating small ferritic workpieces For workpieces weighing up to 10 kg workpieces with a minimum inner...

Induction Heater IH 070 The popular all-round heater for flexible use For heating medium-sized workpieces For rolling bearings weighing up to 120 kg For workpieces with an inner diameter of 20 to 400 mm Also included: 3 yokes, 1 temperature probe, 1 pair of protective gloves Available for voltages of 100, 115 and 230 V Swivel arm available as an option Induction Heater IH 090 The compact heater for serial production Heating device with cooling fan for medium-sized workpieces For rolling bearings weighing up to 150 kg For workpieces with an inner diameter of 20 to 400 mm Also included: 3...

simatherm applications The simatherm induction heaters VOLCANO IH 025 and IH 070 with two differently sized workpieces: the model IH 070 (in the front) heats a gearwheel sleeve to the specified installation temperature. The induction heater IH 070 is the ideal choice for heating the return sprocket of the step chain of an escalator. The simatherm IH 045 is operated via the APP simatec WoM. The spherical roller bearing is heated with the two-sensor mode, to avoid mechanical stresses in the bearing. The roller bearing placed around the coil of an IH 210 heater is heated by induction. A...

Technical data Type Description Heaters for small workpieces Max. weight of rolling bearing Bore diameter 10 kg from 20 mm inner diameter to 160 mm outer diameter Temperature range Magnetic probe Accuracy (electronic) Range of time control Time setting in steps Variable power level Automatic demagnetisation Residual magnetism Coil diameter Size of operating area (WxH) Dimensions (LxWxH) Overall weight Number of standard yokes Standard yokes Core cross section Movable yoke Induction heater for small workpieces

Induction heater for small to medium workpieces Induction heater for medium-sized workpieces Induction heater with cooling fan for continuous operation and for medium-sized workpieces Induction heater for large workpieces 42,5×42,5×219 mm for bearings with a bore diameter of at least 60 mm 28×28×219 mm for bearings with a bore diameter of at least 40 mm 14×14×219 mm for bearings with a bore diameter of at least 20 mm 55×55×275 mm for bearings with a bore diameter of at least 78 mm 28×28×275 mm for bearings with a bore diameter of at least 40 mm 14×14×275 mm for bearings with a bore diameter...

simatool tools simatool – quality tools for the installation and removal of bearings and seals With simatool tools, rolling bearings and shaft seals can be installed and removed quickly and safely. The well proven tools have an ergonomic design. They allow all types of work to be carried out in a much quicker, safer and more controlled manner. All tools are made from premium materials and are manufactured to a superior standard. Furthermore, the toolsets come in robust plastic cases for convenience and portability. Areas of application of special tools Vehicle industry Gear box manufacture...

Fitting Tool FT 33 An installation tool that has proven itself thousands of times The simatool FT 33 is the fast, precise and reliable tool for the installation of bearings and seals. For shaft diameters measuring from 10–50 mm he kit includes 33 impact rings, 3 impact sleeves, 1 non-rebound hammer T Compact toolset includes a selection table in a handy case Can also be used for presses in combination with the Fitting Tool FT-P Fitting Tool FT-P Tool for pressing bearings in or on by means of a press When used in combination with the mechanical press, the simatool FT-P Fitting Tool ensures...