Table of contents Advantages: Installation and removal of rolling bearings 3 simatherm induction heaters 4 simatherm technical data 8 Many processes can literally grind to a halt if bearings are not properly installed and lubricated. If it is necessary to replace worn-out bearings and seals, the job must be done efficiently and professionally from the start. simatherm induction heaters and simatool quality tools guarantee total success with rolling bearings.

Over 60% of premature bearing failures are preventable. simatec supplies unique hardware solutions for the careful installation and removal and automatic lubrication. Contamination from outside Over 16% of premature bearing failures are caused by improper installation. The lack of proper tooling and know-how often leads to new bearings being subjected to high levels of stress and subsurface damage. This makes premature bearing failure inevitable. In order to prevent this, the correct procedure should be employed using professional, specialist tools throughout the installation process. Only in...

simatherm induction heaterssimatherm - perfect solutions for the clean, efficient installation of rolling bearings With simatherm induction heaters, rolling bearings and other ring-shaped metal parts can be heated in a highly efficient manner. They allow a quick and clean installation and replace conventional heating methods such as heating plates, hot oil baths, open flames and ovens. During the heating process, only the workpiece is heated while the device itself remains cool. simatherm induction heaters can be used for workpieces weighing up to 300 kg. Heating with induction The heating of...

Induction Heater IH 045World's first controllable induction heater with an app For heating the most common roller bearings • For workpieces with an inner diameter of 20 to 310 mm • Also included: 3 yokes, 1 temperature probe, 1 pair of protective gloves Heating device for mid-sized bearings with smart app-controlled precision • For workpieces with an inner diameter of 20 to 400 mm • Also included: 3 yokes, 1 swivel arm, 1 temperature probe, 1 pair of protective gloves • Fan cooling for continuous operation • Swivel arm available as an option

For heating large workpieces • For rolling bearings weighing up to 300 kg • For workpieces with an inner diameter of 60 to 640 mm • Also included: 2 yokes, 1 temperature probe, 1 pair of protective gloves • Extremely simple operation thanks to the sliding yoke The portable induction heater for heating small ferritic workpieces • For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm • Also included: 1 temperature probe, 1 pair of protective gloves, 1 carrying case • PTC (predictive temperature control) for automatic temperature monitoring Specially designed...

simatherm applications Two mechanics use an iPad to monitor the heating process of a bearing that has been placed precisely over the swivelling arm of the simatherm IH 125 induction heating device. Thanks to the two temperature probes and his smartphone, the maintenance professional monitors the precise heating process of a large bearing on the IH 125. The simatherm IH 045 is operated via the APP simatec WoM. The spherical roller bearing is heated with the two-sensor mode, to avoid mechanical stresses in the bearing. The roller bearing placed around the coil of an IH 210 heater is heated by induction....

Technical data Heaters for small workpieces Max. weight of rolling bearing Bore diameter 10 kg from 20 mm inner diameter to 160 mm outer diameter Temperature range Magnetic probe Accuracy (electronic) Range of time control Time setting in steps Variable power level Automatic demagnetisation Residual magnetism Coil diameter Size of operating area (WxH) Dimensions (LxWxH) Overall weight Number of standard yokes Standard yokes Core cross section Movable yoke Induction heater for small workpieces HPL 200/230 V (Art.110-18030) HPL 200/110 V (Art. 110-18040)

Induction heater for small to medium workpieces Induction heater for medium-sized workpieces Induction heater for large workpieces 42,5×42,5×219 mm for bearings with a bore diameter of at least 60 mm 28×28×219 mm for bearings with a bore diameter of at least 40 mm 14×14×219 mm for bearings with a bore diameter of at least 20 mm 55×55×275 mm for bearings with a bore diameter of at least 78 mm 28×28×275 mm for bearings with a bore diameter of at least 40 mm 14×14×275 mm for bearings with a bore diameter of at least 20 mm 70×70×420 mm for bearings with a bore diameter of at least 100 mm 40×40×420...

With simatool tools, rolling bearings and shaft seals can be installed and removed quickly and safely. The well proven tools have an ergonomic design. They allow all types of work to be carried out in a much quicker, safer and more controlled manner. All tools are made from premium materials and are manufactured to a superior standard. Furthermore, the toolsets come in robust plastic cases for convenience and portability. • Vehicle industry • Manufacture of electric motors • General engineering Find more information about our tools at www.simatec.com/en/simatool 10

An installation tool that has proven itself thousands of times The simatool FT 33 is the fast, precise and reliable tool for the installation of bearings and seals. • For shaft diameters measuring from 10-50 mm • The kit includes 33 impact rings, 3 impact sleeves, 1 non-rebound hammer • Compact toolset includes a selection table in a handy case • Can also be used for presses in combination with the Fitting Tool FT-P Tool for pressing bearings in or on by means of a press When used in combination with the mechanical press, the simatool FT-P Fitting Tool ensures the correct installation of components...

Ball Bearing Puller BP 61The internal extractor for demanding users The bearing extractor enables the removal of deep groove ball bearings. The shaft does not have to be removed - a significant advantage. • For shaft diameters measuring from 10-100 mm • The kit includes 2 spindles, 6 sets of puller arms, 1 counter bracket • Compact toolset includes a selection table in a handy case The simatool BP 160 dismounting tool enables the dismounting of deep groove ball bearings from the shaft and from the housing. • For bearing inner diameters of 30-160 mm • The set contains 6 sets of ball adapters,...