Catalogs >
simatec AG >
Bearing Puller BP 160

Bearing Puller BP 160
2Pages

Catalog excerpts

The BP 1 60 Bearing Puller enables the professional removal of deep groove ball bearings. Sealed bearings can also be removed after removing the appropriate seal. The ball adapters of the pull rod are inserted in the bearing race and then rotated by 90 degrees to ensure a secure hold. The BP 160 Bearing Puller makes it possible to remove more than 50 different deep groove ball bearings, with an inner diameter of 30 to 160 mm. Your benefits from the simatool BP 160 Bearing Puller: ■ Professional removal of deep groove ball bearings ■ Adjacent parts do not need to be removed or dismantled ■ High-quality case ■ An ideal addition to the simatool BP 61 Bearing Puller

Open the catalog to page 1

Application areas for the BP 160 User steps The case contains: ■ Pulling arm support beam G 1/2 ■ Spindle G1/2 ■ 2 pull rods ■ 2 extensions ■ Ball adapter A7 - A12 ■ Instruction for use Application areas of the BP 160: ■ Machine construction industry ■ Operational maintenance ■ Maintenance of electric motors ■ Conveyor technology ■ Textile industry ■ Metalworking industry ■ Construction equipment ■ Agricultural machinery ■ Automotive industry ■ Recycling industry ■ Cement industry ■ Cable cars/ropeways Suitable for the following bearings simatec ag Stadthof 2 CH-3380 Wangen a. Aare Tel.:...

Open the catalog to page 2