Bearing Handling Tool BHT 300-500 and 500-700
2Pages

{{requestButtons}}

Catalog excerpts

Bearing Handling Tool BHT 300-500 and 500-700 - 1

smart tools Bearing Handling Tool BHT 300-500 and 500-700 The secure solution for handling large and heavy bearings The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings. The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. The BHT consists of: 2 1 ■ 2 ■ 2 ■ 2 ■ 2 ■ carrying belts pair of protective gloves steel clamping strips handles turning handles inner race fasteners Description of Bearing Handling Tool With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. Steel clamping strips Turning handles Inner race fasteners

Open the catalog to page 1
Bearing Handling Tool BHT 300-500 and 500-700 - 2

Technical Data Bearing Handling Tool BHT 300–500 Designation Bearing Handling Tool, BHT 300–500 Secure handling of large bearings Maximum handling force Bearings with an outer diameter of 300–500 mm Bearing Handling Tool, BHT 500–700 Secure handling of large bearings Maximum handling force Bearings with an outer diameter of 500–700 mm Mode of Operation Bearing Handling Tool The simatool Bearing Handling Tool consists of two handles, two turning handles and steel strips that enclose the bearing on the outer race. When the handles on the support arms are uniformly tightened, the steel strips...

Open the catalog to page 2

All Simatec AG catalogs and technical brochures

Archived catalogs