BP 160 Bearing Puller: Removal of deep groove ball bearings from shafts and housings The BP 160 Bearing Puller permits the professional removal of deep groove ball bearings. Sealed bearings can also be removed after removing the appropriate seal. The ball adapters of the pull rod are inserted in the bearing race and then rotated by 90 degrees to ensure a secure hold. The BP 160 Bearing Puller makes it possible to remove more than 50 different deep groove ball bearings, with an inner diameter of 30 to 160 mm. Case contents: • Pulling arm support beam G 1/2 • Custom molded carrying case (9.1 kg) Description BP 160 Bearing Puller • With the help of extensions, even hard-to-reach bearings can be easily expanded. A bearing selection table is enclosed in the tool case • The removal tool BP 160 is suitable for the removal of deep groove ball bearings, from the shaft and from the housing. © simatec 20.10.2022 Technical data sheet - simatool deep-groove ball bearing removal set BP 160

Technical data BP 160 Bearing Puller 22mm 6 sets each with 2 ball adapters 437 x 379 x 100 mm 9 100g Spanner size: External dimensions of the carrying case (L x W x H): Weight of the kit: Clamping width Selection table BP160 Bearing Puller Clamping depth © simatec 20.10.2022 Technical data sheet - simatool deep-groove ball bearing removal set BP 160