Technical data sheet The secure solution for handling large and heavy bearings The simatool Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings. The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. • 1 pair of protective gloves • 2 steel clamping strips • 2 inner race fasteners With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. J Steel clamping strips ^ Handles 3 Turning handles Inner race fasteners © simatec 01.09.2022 Technical data sheet - BHT 200-400, 300-500 and 500-700

Technical data sheet Technical data Bearing Handling Tool BHT 200-400 • Designation: Bearing Handling Tool, BHT 200-400 • Application: Secure handling of medium-sized bearings • Maximum handling force: 150 kg • Handling: Bearings with an outer diameter of 200-400 mm • Designation: Bearing Handling Tool, BHT 500-700 • Application: Secure handling of very large bearings • Maximum handling force: 500 kg • Handling: Bearings with an outer diameter of 500-700 mm • Designation: Bearing Handling Tool, BHT 300-500 • Application: Secure handling of large bearings • Maximum handling force: 500 kg • Handling:...