Twin Puller TP 150 - Professional dismounting of deep groove ball bearings and radial shaft seals The simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of this tool. The TP 150 can also be used to dismount shaft seals, thus making it a unique and professional dismounting tool. Case contents: • 6 sets of extraction arms (A1-A6) • Grip handle • Sliding hammer • Extension for sliding hammer Description and technical data of Twin Puller TP 150 • Suitable for shaft diameters from 10 to 100 mm and external diameters up to 150 mm • Three dismounting functions in one tool set • Compact toolset includes a selection table in a handy case • Perfect complement to the well-proven simatool Fitting Tool FT 33 • Weight of the case 6,6 kg / dimensions (L x W x H) Technical data sheet - Bearing dismounting toolset TP 150

Technical data sheet Bearing dismounting toolset TP 150 Professional dismounting with Twin Puller TP 150 Removing deep groove ball bearings with a press fit on the inner ring (shaft) Place the extraction arms between the rolling elements in the bearing. Use the threaded spindle to remove the bearing from the shaft. Removing deep groove ball bearings with a press fit on the outer ring (housing) The support washer replaces the shaft on the inner ring and is tensioned using the threaded spindle. Remove the bearing by using the sliding hammer. Removing radial shaft seals Hammer the tapping screw...

Selection table Twin Puller TP 150 © simatec 20.10.2022 Technical data sheet - Bearing dismounting toolset TP 150 31.51.03-3