Large heater for bearings up to 300 kg The large simatherm induction heater for roller bearings and other circular metal workpieces up to 640 mm bore diameter and a cross section of 250 x 250 mm. With the integrated time and temperature controls, roller bearings can be heated to the prescribed 110°C while other circular metal workpieces can be heated to 250°C. • Sliding yoke allows easy loading and unloading • Very compact design - including the yokes, only 75 kg overall weight • Other power versions are available upon request • Special executions with fans or an increased work area available upon request Description of IH 210 1 Clear control panel with LED-display 3 Induction coil outside of the housing shortens the heating time and reduces the energy usage 4 Support yoke (two yokes included) 5 Magnetic temperature probe for monitoring the bearing temperature and for preventing overheating © simatec 08.03.2023 Technical Data Sheet - IH 210

Technical Data IH 210 Designation Heater for large workpieces Voltage V / Hz / power 400 V / 50 Hz / 10.0 kVA 440-480 V / 50-60 Hz / 11.5 kVA 575 V / 60 Hz / 10.4 kVA Workpiece - Maximum weight - Bore diameter Temperature control - Magnetic probe - Accuracy (electronic) 20 - 250°C (68 - 482°F) yes, type K ± 3°C Time control Maximum temperature (approx.) 0 - 60 minutes ± 0.01 seconds 250°C (482°F) Thermometer mode Bearing temperature mode Power reduction 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism yes / < 2A/cm Suitable for heating sealed bearings Suitable for heating...