11 51 01 - Technical Data Sheet - IH 025 Volcano - EN

Product catalog summary

Overview: The IH 025 VOLCANO is a portable induction heater designed for heating roller bearings and other circular iron workpieces. It is compact, lightweight, and operates silently without the need for support yokes.

Specifications:

Voltage and Power: Available in 220-240 V / 50-60 Hz / 1.5 kVA, 110-120 V / 50-60 Hz / 1.15 kVA, and 100 V / 50-60 Hz / 1.0 kVA.
Workpiece Capacity: Can heat workpieces up to 10 kg with an inner diameter starting from 20 mm to an outer diameter of 160 mm.
Temperature Control: Range from 20°C to 180°C with a magnetic probe for accuracy of ±3°C to 110°C.
Time Control: Adjustable from 0 to 10 minutes with an accuracy of ±0.01 seconds.
Dimensions: 340 x 250 x 64 mm, weighing 3.5 kg.

Features:

PTC for automatic temperature monitoring.
LED-display control panel with a cone-shaped heating surface.
Magnetic temperature probe to prevent overheating.
Automatic demagnetization with residual magnetism < 2A/cm.
Suitable for heating sealed and pre-greased bearings.
Thermal overload protection and error guide codes included.

Performance:

Can heat a 10 kg bearing from 20°C to 110°C in 6 minutes.
Eight power levels for efficient energy use.
Pre-selected temperature of 110°C to protect bearings.

Additional Information:

Comes with a carrying case and a 3-year manufacturer warranty.

Catalog excerpts

11 51 01 - Technical Data Sheet - IH 025 Volcano - EN-1

Technical Data Sheet Induction Heater IH 025 VOLCANO Portable induction heater for bearings weighing up to 10 kg The portable simatherm induction heater for roller bearings and other circular iron workpieces with an inner diameter as small as 20 mm up to an outer diameter of 160 mm. With the integrated time and temperature controls, roller bearings can be heated to the prescribed 110°C while other circular iron workpieces can be heated to 180°C. • Portable, compact and very light (3.5 kg) • Silent operation • No support yokes required – simply place the workpiece on the tool • PTC (Predictive Temperature Control) for automatic temperature monitoring Clearly arranged control panel with LED-display Cone-shaped heating surface Carrying handle Magnetic temperature probe for monitoring the bearing temperature and for preventing overheating Technical Data Sheet - IH 025 VOLCANO

Open the catalog to page 1

11 51 01 - Technical Data Sheet - IH 025 Volcano - EN-2

Technical Data Sheet Induction Heater IH 025 VOLCANO Technical Data IH 025 VOLCANO Designation Voltage V / Hz / power Workpiece - Maximum weight - Bore diameter Temperature control - Range - Magnetic probe - Accuracy (electronic) Time control - Range - Accuracy Maximal temperature (approx.) Thermometer mode Bearing temperature mode Power reduction Automatic demagnetization / residual magnetism Suitable for heating sealed bearings Suitable for heating pre-greased bearings Error guide codes Thermal overload protection Control panel Dimensions (LxWxH) Overall weight Housing material Cooling fan...

Open the catalog to page 2