Notice for Serbois Sima
2Pages

PRODUCT TESTED BY THE CTBA A HIGHLY RESISTANT THREAD Our SERBOIS insert type TRB absorbs stress and evenly spreads loads ensuring a solid and permanent mounting. The shape and configuration of teeth formation avoids any translation or rotation, even when a very high tightening torque is applied. The SERBOIS insert fits in a hole drilled into all types of wood and agglomerates. feeth formation By simple manual pressure, the SERBOIS fits into the hole made for it, no special tooling is required. For large series, we recommend using the ROBOT 2000 described below, as it has a very rapid mounting capacity. when the screw spreads the SERBOIS insert lips out. MOUNTING TOOLS AUTOMATIC MOUNTING ROBOT 2000 This fully automatic machine is for mounting SERBOIS TRB in large series. - an easily wielded mounting pistol with a double action trigger to instantly handle, position and anchor the insert; - a vibratory bowl and pneumatic selector that feeds the inserts to the Range of action : 3 meters. Mounting rate: 800 to 1000 per hour. MANUAL MOUNTING TOOLS They allow better cen- used for mounting small point is then inserted in hammer on the tool handle, drives the insert home.

A process for fastening in wood Dimensions indicated in this table are not limited. If you require, we can manufacture SERBOIS to your dimensions. The tightening torque depends on adjustment of the insert in the hole d. The threaded length of the screw inserted in the SERBOIS must be equal to insert height to ensure a firm seat. As woods react differently, we can realise screwing and tensile tests to find just the right diameter for the SERBOIS insert hole. Tests can be performed free of charge in our laboratories. TECHNICAL PROPERTIES TRACTION TEST ON THE INSERT All values given below are...