C_P501 Brass - Regenerative Turbine Electric Pump

Product catalog summary

Introduction
This document outlines the technical specifications, applications, and standards for various types of pumps, including magnetically coupled pumps, mechanical seal pumps, and regenerative turbine electric pumps. It provides detailed information on their uses, characteristics, and manufacturing standards.

Uses and Applications
The regenerative turbine electric pumps are versatile and suitable for applications such as cooling and chiller systems, air conditioning, thermoregulation, robotics and automation, washing systems, energy applications (including renewable sources), and the mechanical industry.

Specifications
The pumps are designed for continuous duty (S1) with a 2-pole motor, insulation class F, and protection class IP42. They meet the IE3 efficiency class for three-phase motors greater than 0.75 kW. Operating within a tolerance of +/-10%, they are suitable for water dilutions with temperatures from -20°C to +90°C and oil emulsions from -20°C to +120°C. The maximum ambient temperature is +40°C. They are non-self-priming with a maximum suction head of 5 meters.

Manufacturing Standards
The pumps comply with EN 60034-1, EN 60034-30, EN 60335-1, and EN 60335-2-41 standards. Custom configurations, such as special voltages, dual-frequency, and fluid temperatures up to 180°C, are available upon request.

Characteristics
Featuring brass mechanical seals and peripheral impellers, these pumps are ideal for maintaining pressures in closed circuit systems with medium-low hydraulic flow rates. They handle oils and clear, clean liquids without suspended solids or abrasives, with materials that prevent rust formation.

Hydraulic Characteristics
The document provides detailed hydraulic characteristics for water at 20°C at nominal pump speed, with performance data for both 50 Hz and 60 Hz frequencies.

Materials and Dimensions
The pump body and impeller are made of brass (CuZn), and the shaft is made of AISI 420. Detailed dimensions and weights for various pump models are included.

Additional Features
The pumps offer extensive versatility, especially in dual-frequency versions, with a wide selection of mechanical seals available on request. They also feature high-efficiency motors with IE3 standards and options for magnetic drive technology.

Conclusion
These pumps are designed for efficiency and reliability across a wide range of industrial applications, adhering to international standards and offering customizable options to meet specific needs.

Catalog excerpts

C_P501 Brass - Regenerative Turbine Electric Pump-1

- Robotics and automation - Washing - Energetico (anche da fonte rinnovabile) - Energy (also from renewable sources) - Industria meccanica - Mechanical industry ELETTROPOMPE CENTRIFUGHE PERIFERICHE REGENERATIVE TURBINE ELECTRIC PUMPS PERIPHERALRADPUMPEN 离心外围电动泵 - Energietechnik (auch im Bereich erneuerbare Energien) Classe efficienza IE3 per motori trifasi >0,75 kW. Protection IP42. IE3 efficiency class for 3-phase motors >0,75 kW. Temperatura diluizioni acquose (con anticongelante) -20°C / +90°C, emulsioni olio: -20°C / +120°C. Water dilutions temperature (with anti-freeze additive) -20°C / +90°C, oil emulsions -20°C / +120°C. Temperatur wässrige Verdünnungen (mit Frostschutzmittel) -20°C / +90°C, Ölemulsionen: -20°C / +120°C. Temperatura ambiente limite: +40°C. Limit ambient temperature: +40°C. Non autoadescanti, altezza manometrica fino a 5m. Normal priming, manometer suction up to 5m. Per acque/oli e diluizioni limpide non aggressive, senza sospensioni abrasive. For clear waters/oils and non-aggressive dilutions, without abrasive substances. Costruzione secondo le norme: EN 60034-1; EN 60034-30; EN 60335-1; EN 60335-2-41. Manufactured in accordance with: EN 60034-1; EN 60034-30; EN 60335-1; EN 60335-2-41. Su richiesta Tensioni speciali – Doppia frequenza – Liquidi speciali con temperature <180 °C – Altri gradi IP – Motori certificati cRUus per tensioni selezionate – Motore PMSM (Permanent Magnet Sensorless Motor). On demand Special voltages – Dual-frequency – Special fluids with temperature <180 °C – Other IP degrees – cRUus certified motors for selected tensions – Permanent Magnet Sensorless Motor. Nicht Selbstansaugende Manometrische Saughöhe bis 5m. Für klares Wasser/Öl und nichtaggressive Lösungen ohne abrasive Stoffe. Bau Gemäss folgenden Normen: EN 60034-1; EN 60034-30; EN 60335-1; EN 60335-2-41. Auf Anfrage Sonderspannungen – Dual-frequenz – spezielle Flüssigkeiten mit Temperaturen bis 180 °C – cRUus-zertifizierte Motoren für ausgewählte Spannungen – PMSMMotor (Permanent Magnet Sensorless Motor). 司马克 Tecnologia per la movimentazione dei fluidi | Fluid Moving Technology www.simacosrl.it | [email protected] | S.S. 235 n.16 - 26834 Corte Palasio, (Lodi) Italy | T. +39 0371 59181

Open the catalog to page 1

C_P501 Brass - Regenerative Turbine Electric Pump-2

DIMENSIONI _ DIMENSIONS _ GRÖßE _ 尺寸 Ottone o polimero Brass or polymer Messing oder Kunststoff (Polymer) 黄铜或聚合物 Versatilità nelle esecuzioni Versatility in executions Vielfältige Ausführungen 执行通用性 Innovazione: trascinamento magnetico Innovation: magnetic drive Innovation: Magnetantrieb 创新：磁力驱动 Motori alto rendimento a Standard IE3 High efficiency motors with IE3 Standards Hochleistungsmotoren der Wirkungsklasse IE3 符合IE3标准的高效电机 CORPO PUMP BODY 泵盖 ALBERO SHAFT NEW _ Pompe a trascinamento magnetico _ Magnetic drive pumps _ Magnetgekuppelte pumpen _ 磁力驱动泵 MD C 36 DC-24V Vedi catalogo dedicato...

Open the catalog to page 2