Specialised in trenching A TRENCHER is a pavement cutting machine that can operate with either one or two blades of Ø350 mm (14”) or Ø400 mm (16”) and Ø450 mm (18”) or Ø500 mm (20”). The distance between the two blades can be adjusted to 60 cm, 65 cm. and 70 cm. (24”, 26” and 28”). The main use of the TRENCHER is to perform two parallel cuts in one pass, so the excavator can follow digging behind. If the surface to cut is steep, the machine needs only to work downwards. It can also be operated as a conventional cutter, with the blade placed on either sides. Besides, the TRENCHER can also be adapted, with the optional accessories needed, to perform two very close parallel cuts of 5 cm, 8 cm or 10 cm wide. It is a very rugged and all-round machine, improved for heavy duty works always performing with precision and reliability. Cutting width possibilities: FEATURES AND BENEFITS OF THE TRENCHER RANGE Cutting depth operated by a Ø250 mm handwheel and a gas shock absorber. Blade shaft, bearings and transmission fully protected. Oil level disp stick and oil filler hole. Anti vibration height adaptable handle bar. Engine assembled onto flexible rubber silent blocks to reduce vibrations. Transmission by Poly-V belt, improves grip and power transmission. Dual blade cooling system. Regulation for three types of trench width (60, 65 a

Paving treatment Two parallel cuts just in one go. Ø500 mm (20”) blade guards available as optional. (Only for versions Honda 23Hp, Kohler 18Hp and Lombardini 16Hp). It can cut with just one blade, either on the right or the left side. Locking system of cutting depth. Cyclone air filter 13Hp Honda motor version. Oil level dipstick and oil drain plug. Parking brake. Hubcups at front and rear wheels to protect the bearings. TIME SAVING AND INCREASED PRODUCTIVITY: A single line needs to be drawn. This will be the guide for one of the two blades while cutting. Following the drawn line, the machine...