COMBI Range Combined electric bender & shears Specially recommended for rebar production in small - medium housing or infrastructure projects with rebar sizes of up to Ø36mm / 13/8" (#11) for cutting and Ø52mm / 2" for bending, such as small resorts, condominiums, villas, low height apartment buildings, etc. A multi-purpose machine which also allows production of stirrups, spirals and hoops with its optional accessories. The COMBI range is an ideal solution for small to medium rebar contractors and manufacturers, providing full working autonomy in any rebar work, and at a very low cost. One machine, a single investment to do all rebar jobs with a medium production: bending, cutting, stirrups and spirals / hoops. The most complete package. • COMBI machines have the same production and bending capacities as our DEL range benders. They are also featured with the same electrical and mechanical safety devices as DEL machines and its electric components are of worldwide known top quality suppliers as Schneider-Electric. Cast-iron shear body and gearbox case to ensure heavy duty performance and endurance with the lowest maintenance. Oil bath, trapezoidal and helicoidal gears. Safety shield with limit switch on shear body and bending table. Easy low-cost maintenance can be even performed on site by the machine operator. Single-phase 220V version with inverter technology available for model COMBI 25/32. The inverter stabilizes the electric supply so it makes the motor life longer. Two speeds motor available upon request on models COMBI 25/32 and COMBI 30/36. FEATURES AND BENEFITS OF THE DEL AND COMBI RANGE New easy and quick belts tightening system. Inverter equiped (Single-phase). Reduced noise operation. Safety foot pedal control. Pins with new anti stick lubrication system. Bolt for extracting pins (optional). Protection shield for control panel. Stirrup device for max. rebar Ø 14mm / 5/8" - #5 (optional). Large diameter rebars bending kit (optional). Spirals / hoops bending accessory (optional).

Rebar Processing Bending, operated as our DEL range rebar benders. Stirrups production using the optional stirrups accessory. Cutting, thanks to its shear jaw simultaneously operated with the bending plate. Production of spirals, rings and arches using the optional Spirals Bending accessory Cutting / Bending capacity Yield strength / Grade *For models COMBI with 2 speeds motor, please check bending capacities with your sales representative. Accessories included COMBI 25 - 32 1- PHASE Item code Motor voltage (V) Frequency (Hz) / In (pins) Kw (Hp) Cycles / minute (bend - cut / return) Oil capacity...