1. Catalogs
  2. SilverNet
  3. Copper Modules

Copper Modules

Copper Modules

Product catalog summary
Overview
The document provides details on SilverNet's copper modules, specifically the SFP0-01-25-XXXT-0-1 and SFPX-08-10-XXXT-0-03 models. These modules support data transmission over twisted-pair cables with RJ45 connectors, suitable for short-distance communication in applications like servers, switches, and LANs in data centers.

Specifications
  • SFP0-01-25-XXXT-0-1: Supports 10/100/1000 Mbps over Cat5 cable, up to 100m.
  • SFPX-08-10-XXXT-0-03: Supports 10G BASE-T over Cat6a/7 cable, up to 30m.

Features
  • Compliant with SFP MSA and IEEE 802.3 specifications.
  • Operating temperature: -5°C to +85°C; Humidity: 5-95% non-condensing.
  • Storage temperature: -40°C to +85°C.
  • Hot pluggable SFP footprint with a fully metallic enclosure for low EMI.
  • Low power dissipation: 1.05 W typical for 1Gbps, 2.5 W typical for 10Gbps.
  • Compact RJ-45 connector assembly with access to physical layer IC via a 2-wire serial bus.

Important Notes
  • Performance figures are based on ideal conditions; actual performance may vary due to environmental factors.
  • A site survey is recommended prior to installation.
  • Compliance with local legislative restrictions is the end user's responsibility.

Part Codes
  • SIL-SFP0-01-25-XXXT-0-1: 1Gbps RJ45 Copper SFP, 100m.
  • SIL-SFPX-08-10-XXXT-0-03: 10Gbps RJ45 Copper SFP, 30m.
See more

Catalog excerpts

Copper Modules-1

Copper Modules SFP0-01-25-XXXT-0-1 SFPX-08-10-XXXT-0-03 1Gbps & 10Gbps Copper Modules RJ45 SFP OVERVIEW The SilverNet SFP0-01-25-XXXT-0-1 supports 10/100/1000 Mbps data rate over Cat5 cable with an RJ45 connector interface. It allows communication over twisted-pair up to 100m. The SilverNet SFPX-08-10-XXXT-0-03 supports 10G BASE-T data rate over Cat6a/7 cable with an RJ45 connector interface. It allows communication up to 30m. Our copper modules are commonly used for transmitting data over a short distance and can be used for servers, switches, LANs in data centres, uplinks and many more applications. Support 1000BASE-T & 10G BASE-T operation respectively 100m Reach over Cat5 UTP Cable Up to 30m reach over Cat6a/7 Cable Hot Pluggable SFP Footprint Fully metallic enclosure for low EMI Low power dissipation (1.05 W typical & 2.5 W typical respectively) Compact RJ-45 connector assembly Access to physical layer IC via 2-wire serial bus Part Code Compliant with SFP MSA specification Compliant with IEEE 802.3 Operating temperature and humidity: -5°C to +85°C 5 - 95% non-condensing Storage temperature: -40°C to +85°C Copyright © SilverNet Limited. All rights reserved. All other company and product names may be trademarks of their respective companies. Whilst every effort is made to make sure the information shown is accurate, SilverNet Limited can not accept liability for any errors that may arise. No freedom to use information, patents, trademarks or other intellectual property rights is implied by the publication of this document. E&OE. SilverNet Limited reserve the right to change specifications and other information within this document without notice and your attention is brought to the fact that performance figures are under ideal conditions. Actual performance will depend on many environmental factors and it is recommended that a site survey is undertaken prior to installation. Please also note that this equipment may also be subject to local legislative restrictions. It is the end users responsibility to ensure that the installation complies with any such restrictions that are in force. Copyright ©2020 SilverNet, All rightsreserved.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.