Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Silicon Designs
  3. Silicon Designs Model TB1210 Test Board for Model 1210L, 1210J, 1221L & 1221J Accelerometers

Silicon Designs Model TB1210 Test Board for Model 1210L, 1210J, 1221L & 1221J Accelerometers

Silicon Designs Model TB1210 Test Board for Model 1210L, 1210J, 1221L & 1221J Accelerometers
1 / 2 PagesView full catalog

Silicon Designs Model TB1210 Test Board for Model 1210L, 1210J, 1221L & 1221J Accelerometers

Product catalog summary
Overview: This document provides solder assembly tips for Silicon Designs' TB1010 and TB1210 models, focusing on reflow using a hotplate and hand soldering methods.
Preferred Soldering Method: Reflow using a hotplate is recommended for assembling TB1010 or TB1210 models. Sn62 or Sn63 type solder is advised.
Hand Soldering: Hand soldering is possible but challenging due to the small size of connections. A fine-tipped soldering iron and visual magnification are recommended. The J-Leaded version (1010J or 1210J) is suggested for easier inspection.
Pre-Tinning Recommendation: Pre-tinning accelerometer leads is advised to prevent gold migration embrittlement. Avoid the solder bath method due to potential heat damage. Instead, tin one lead at a time using a fine-tipped solder iron.
Hotplate Attach Method: Apply solder paste or pre-tin the circuit board's pads. Place components in position and heat on a pre-heated hotplate at around 200°C until solder flows. Avoid overheating.
Solder Iron Attach Method with Solder Paste: Apply solder paste to pads, position components, and secure by soldering opposite corner pads first. Ensure all connections are centered. Allow cooling between soldering each pin.
Solder Iron Attach Method with Solder Wire: Pre-tin two opposite corner pads, position the accelerometer, and solder the tinned pads. Ensure proper alignment and allow cooling between soldering each pin. For TB1210, adjust C2 leads and solder to specific pins.
Contact Information: Silicon Designs, Inc., 1445-NW Mall Street, Issaquah, WA 98027-5344. Phone: (425)391-8329, Fax: (425)391-0446. Website: www.silicondesigns.com
See more

Catalog excerpts

Silicon Designs Model TB1210 Test Board for Model 1210L, 1210J, 1221L & 1221J Accelerometers-1

SILICON DESIGNS, INC. Model TB1210 TEST BOARD for model 1210L, 1210J, 1221L & 1221J Accelerometers PARTS LIST QTY REFERENCE DESIGNATION 1 - 1 PCB1 1 C1 1 C2 2 R1&R2 1 H1 PART NUMBER Model 1210L or 1210J or 1221Lor 1221J 100-00023-01 753-00001-23 753-10001-01 773-00001-01 702-00001-10 PART DESCRIPTION Model 1210 Accelerometer (Sold Separately) or Model 1221 Accelerometer (Sold Separately) Printed Circuit Board Capacitor, Surface Mount Chip, Size 1205,0.1 uF Capacitor, Ceramic Leaded, 0.01 uF (Blue) Rsister, Surface Mount Chip, Size 0805,1%, 4.99K Header, Right Angle, 2x5 pins h -0.70- rr il O PCB1 0.75 1210I -xxx ix m _| [M] ■a 2n 4n 6n 8n 1Tncv,i * 1 H1 0.10 0.10 SIGNALS HEADER SIGNAL SIGNAL PIN NAME DESCRITPION 1 DV Deflection Voltage input 2 - (not used) 3 - (leave open or tie to +5V) 4 - (not used) 5 AOP Analog Output, Positive 6 VDD +5V Power 7 - (not used) 8 AON Analog Output, Ngative 9 +2.5V +2.5V R驩frence 10 GND Ground I+5VDC: ni. 5K- (1) Deflection Voltage > (9) +2.5V R闩frence > r2 -5K< 1%' non VR 14 h 闏fIc, VDD -> Positive Output (5) -> N۩gative Output (8) DV AOP 1210X-xxx 2.5V GND AON 19 18 (10) Ground: Silicon Designs, Inc., 1445 NW Mail Street, Issaquah, WA 98027-5344 Phone: 425-391-8329 FAX: 425-391-0446 Seeour Web Site at: www.silicondesigns.comFeb07

 Open the catalog to page 1
Silicon Designs Model TB1210 Test Board for Model 1210L, 1210J, 1221L & 1221J Accelerometers-2

SILICON DESIGNS, INC TB1010 & TB1210 SOLDER ASSEMBLY TIPS Reflow using a hotplate is the preferred method for assembling the model TB1010 or TB1210 and Sn62 or Sn63 type solder is recommended. Hand soldering using a fine tipped soldering iron is possible but difficult without a steady hand and some form of visual magnification due to the small size of the connections. When using the hand solder iron method, it’s best to purchase the J-Leaded version (1010J or 1210J) for easier visual inspection of the finished solder joints. Pre-Tinning of Accelerometer Leads is Recommended: To prevent gold migration...

 Open the catalog to page 2

All Silicon Designs catalogs and technical brochures

  1. Silicon Designs Model 1010 Digital Accelerometer Chip (LCC/LJCC)
    Silicon Designs Model 1010 Digital Accelerometer Chip (LCC/LJCC)

    8  Pages

  2. Silicon Designs Model 2276 Analog Accelerometer Module
    Silicon Designs Model 2276 Analog Accelerometer Module

    3  Pages

  3. Silicon Designs Model 2266 Analog Accelerometer Module
    Silicon Designs Model 2266 Analog Accelerometer Module

    3  Pages

  4. Silicon Designs Model 1210 Analog Accel with ±4V Differential Output
    Silicon Designs Model 1210 Analog Accel with ±4V Differential Output

    6  Pages

  5. Silicon Designs Model 1221 Low Noise Analog Accel ±4V Differential Output
    Silicon Designs Model 1221 Low Noise Analog Accel ±4V Differential Output

    7  Pages

  6. Silicon Designs Model 2460 Analog Accel with ±4V Differential Output or 0.5V to 4.5V Single Ended Output, +8 to +32V DC Power
    Silicon Designs Model 2460 Analog Accel with ±4V Differential Output or 0.5V to 4.5V Single Ended Output, +8 to +32V DC Power

    3  Pages

  7. Silicon Designs Model 2260 Analog Accel, ±4V Differential or 4V Single Ended Output, +8 to +32 VDC
    Silicon Designs Model 2260 Analog Accel, ±4V Differential or 4V Single Ended Output, +8 to +32 VDC

    3  Pages

  8. Silicon Designs Model 2210 Buffered ±4V Differential or 4V Single Ended Output, Internal Voltage Regulator & Reference, +9 to +32 VDC Power
    Silicon Designs Model 2210 Buffered ±4V Differential or 4V Single Ended Output, Internal Voltage Regulator & Reference, +9 to +32 VDC Power

    3  Pages

  9. Silicon Designs Model 2240 Hermetically Sealed Analog Accel with Removable Plug & Cable
    Silicon Designs Model 2240 Hermetically Sealed Analog Accel with Removable Plug & Cable

    3  Pages

  10. Silicon Designs Model 2210 Analog Accel ±4V Differential Output or 0.5V to 4.5V Single Ended Output
    Silicon Designs Model 2210 Analog Accel ±4V Differential Output or 0.5V to 4.5V Single Ended Output

    3  Pages

  11. Silicon Designs Model 2220 Analog Accelerometer Module, ±4V Differential Output or 0.5V to 4.5V Single Ended Output, +9 to +32V DC Power
    Silicon Designs Model 2220 Analog Accelerometer Module, ±4V Differential Output or 0.5V to 4.5V Single Ended Output, +9 to +32V DC Power

    3  Pages

  12. Silicon Designs Model 2230-BLK Orthogonal Mounting Block for Use with Silicon Designs Models 2010, 2012, 2210, 2220, 2240, 2260 & 2264
    Silicon Designs Model 2230-BLK Orthogonal Mounting Block for Use with Silicon Designs Models 2010, 2012, 2210, 2220, 2240, 2260 & 2264

    2  Pages

  13. Silicon Designs Model 2422 Triaxial Analog Accel Module, ±4V Differential or 4V Single Ended Output, +5 VDC Power
    Silicon Designs Model 2422 Triaxial Analog Accel Module, ±4V Differential or 4V Single Ended Output, +5 VDC Power

    3  Pages

  14. Silicon Designs Model 2470 Triaxial Analog Accelerometer Module, ±4V Differential Output or 0.5V to 4.5V Single Ended Output, +8 to +32V DC Power
    Silicon Designs Model 2470 Triaxial Analog Accelerometer Module, ±4V Differential Output or 0.5V to 4.5V Single Ended Output, +8 to +32V DC Power

    3  Pages

  15. Silicon Designs Model 2235-BLK Single Axis Stud Mounting Block
    Silicon Designs Model 2235-BLK Single Axis Stud Mounting Block

    1  Page

  16. Triaxial MEMS Capacitive Analog Accelerometer Module
    Triaxial MEMS Capacitive Analog Accelerometer Module

    3  Pages

  17. Silicon Designs Model 1010
    Silicon Designs Model 1010

    8  Pages

  18. LG Series
    LG Series

    3  Pages

  19. Silicon Designs Model 2012 Analog Accelerometer Module
    Silicon Designs Model 2012 Analog Accelerometer Module

    3  Pages

  20. Silicon Designs Model 2412 Analog Open Frame Triaxial Accelerometer
    Silicon Designs Model 2412 Analog Open Frame Triaxial Accelerometer

    2  Pages

  21. Silicon Designs TB1010 Test Board for Model 1010 Accelerometers
    Silicon Designs TB1010 Test Board for Model 1010 Accelerometers

    2  Pages

  22. Silicon Designs Model EB1210 L-Lead (Leadless) Evaluation Board
    Silicon Designs Model EB1210 L-Lead (Leadless) Evaluation Board

    1  Page

  23. Silicon Designs Model 2420 Triaxial Digital Accel Module, Pulse Density Output, +5 VDC Power, 9-Pin D-Subminiature Connector
    Silicon Designs Model 2420 Triaxial Digital Accel Module, Pulse Density Output, +5 VDC Power, 9-Pin D-Subminiature Connector

    4  Pages

  24. Silicon Designs Model 2010 Digital Accel Module
    Silicon Designs Model 2010 Digital Accel Module

    3  Pages

  25. Silicon Designs Model SDI 3320 Cable Adaptor Accessory
    Silicon Designs Model SDI 3320 Cable Adaptor Accessory

    1  Page

  26. Model 3320 Accessories Single Axis accelerometer(s)
    Model 3320 Accessories Single Axis accelerometer(s)

    3  Pages

  27. Model 3320 G-Logger
    Model 3320 G-Logger

    2  Pages

  28. Model 3310 G-Logger Integrated 3 Axis Accelerometer
    Model 3310 G-Logger Integrated 3 Axis Accelerometer

    2  Pages

Archived catalogs

  1. Silicon Designs Model 2264 Analog Accelerometer, ±500 mV Differential or 250 mV Single Ended Output, +6 to +22 VDC
    Silicon Designs Model 2264 Analog Accelerometer, ±500 mV Differential or 250 mV Single Ended Output, +6 to +22 VDC

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.