SX-59HLS
1 /2Pages

SX-59HLS

SX-59HLS
1 /2Pages

Catalog excerpts

SX-59HLS-1

SX-59HLS Wireless 802.11n System on Module with Enterprise Security for IoT Applications Smaller, Cheaper, and Higher Performance Wireless Module The SX-59HLS is an ultra-low power Hosted Dual Band 1x1 802.11a/b/g/n Internet-of-Things (IoT) wireless module based on the Qualcomm QCA4012-2 System-on-Chip (SoC). It integrates a QCA4012-2 SoC with 16-Mbit SPI Flash, 40 MHz TCXO, single Balun IC, and a 2.4/5 GHz printed PCB antenna. It is ideal for hosted applications, as 800 Kbyte of on-chip RAM memory is available for customer applications and third-party software thus making an external MCU optional. It also supports a UART AT command set for optional external MCU. The SX-59HLS is a first in class to provide enterprise security for today’s high performing networks. With support for TLS v1.2, WPA2 and the most common EAP types (PEAP, TLS, TTLS, FAST), the module provides an easy to use AT style interface for the transferring and storage of certificates, configuring of network parameters and installation of user credentials. SX-59HLS delivers Wi-Fi connectivity, integrated intelligence, security, and advanced services for many IoE systems including medical devices, remote control, appliances, home & factory automation, energy management, residential lighting, security, sensors, wearables, etc. Ultra-Low-Power Since an external CPU is not required the overall system power is reduced. It additionally supports power save features inclulding deep sleep modes which help reduce power usage during periods of inactivity. Fast Time to Market Eliminating the need for the development of a wireless LAN driver and security supplicant, it is ideal for minimizing upfront engineering investment and reducing time to market. The module has modular certifications for North America, Europe and Japan, thus reducing certification costs. Silex AT Commands Silex AT command application (Silex AT command) is a modem-like UART control command set for the SX-59HLS Wi-Fi module making it easier to configure, debug and control the radio module. Hardware Specifications: Product Name Radio Chipset Integrated 16-Mbit SPI Flash, 800 Kbyte of on-chip RAM memory Radio Specifications Supported Interface High Speed UART WPA/WPA2 802.11x (LEAP, PEAP, TLS, TTLS, FAST) WPS - Push Button Configuration WPS- PIN Code Method Industry Leading Enterprise Security The SX-59HLS supports WPA and WPA2 including 802.1x Extensible Authentication Protocol (EAP) types. The module provides an easy to use AT style interface for the transferring and storage of certificates Operating Voltage Operating Temperature Small Form Factor Small form factor makes it ideal for IoT applications. This also gives OEMs greater flexibility and efficiency in their product designs. Modular Certifications silex technology is a registered trademark of silex technology, Inc. Other product or brand names may be registered trademarks or trademarks of their respective owners. Technical information and specifications are subject to change without notice. © silex technology, Inc. All rights reserved. silex global sales & support locations US Office silex technology america, Inc. +1-657-218-5199 www.silextechnology.com [email protected] Europe Office silex technology europe, GmbH +49-2154-88967-0 Germany toll free 0800-7453938 www.silextechnology.com [email protected] India Office silex technology india, Pvt. Ltd.,. +91-44-43033234 www.silex-india.com [email protected] Corporate Headquarters silex technology, Inc. +81-774-98-3781 www.silex.jp [email protected] PN: 141-xxxxx-xxx REV A

 Open the catalog to page 1
SX-59HLS-2

When it Absolutely Must Connect SX-59HLS SYSTEM BLOCK DIAGRAM Evaluation Kit SIlex AT Command (Software) The SX-59HLS module (bulk and sample pack) comes with Silex AT command firmware already pre-programmed from the factory. Silex AT command works just like a modem. It is intended to connect to a host system with UART and works as serial-to-Wi-Fi media converter. Silex AT command can run on one of the three UART ports of QCA4012. The Silex developed AT command set makes it easier to configure and control the SX-59HLS radio module. • Debug messages • UART setting and control • GPIO Reading and...

 Open the catalog to page 2

All Silex technology, Inc. catalogs and technical brochures

  1. SD-330AC

    2  Pages

  2. BR-330AC-LP

    2  Pages

  3. BR-100AH

    1  Page

  4. EX-150AH-US

    2  Pages

  5. AP-150AH-US

    2  Pages

  6. BR-500AC

    2  Pages

  7. IM-100-EB

    1  Page

  8. IM-100-RB

    1  Page

  9. SX-ULPGN-BTZ

    2  Pages

  10. SX-590-1402

    2  Pages

  11. SX-590

    1  Page

  12. SX-USBAC

    2  Pages

  13. SX-PCEAC2

    1  Page

  14. SX-SDPAC

    1  Page

  15. SX-SDMAC-Plus

    2  Pages

  16. SX-SDMAC

    2  Pages

  17. SX-SDMAX

    2  Pages

  18. BR-330AC-LP

    2  Pages

  19. EP-200Q

    2  Pages

  20. SX-SDMAH

    2  Pages

  21. IM-100

    1  Page

  22. SX-PCEBE

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.