SX-590-1402 Enterprise 802.11ac System on Module for Embedded Applications (FIPS 140-2 Certified & TAA Compliant) Enable FIPS product embedding Wi-Fi interface with NIST approved security The SX-590-1402 is FIPS 140-2 high-performance Connectivity Examples Serial/Ethernet to secure 802.11ac Wi-Fi module. • Serial connection over Wireless/Wired LAN OEMs benefit from reduced upfront engineering effort and time to market; FIPS product development by “FIPS Inside” approach* No need for a development of a wireless LAN driver and security supplicant An embedded serial port can be accessed through Wi-Fi access point. Adopting the module with modular certifications for North America, Europe and Japan The SX-590-1402 features NXP’s power efficient and cost optimized applications processor, the i.MX 6ULL featuring an ARM Cortex-A7 core, 802.11ac radio, a complete TCP/IP Wi-Fi Access point PC Ethernet Network backbone SX-590-1402 UART Embedded system as Wi-Fi station network protocol stack, and an optimized QCA9377 wireless radio driver and security supplicant in a self-contained hardware to an embedded serial port. The SX-590-1402 adds access point capability and accessibility * FIPS validation of SX-590-1402 is in progress SX-590-1402 PC Embedded system with AP capability Key Features • FIPS 140-2 cryptographic operation Wireless LAN connectivity is established by FIPS 140-2 certified authentication and encryption. End-to-end applications, TCP port The SX-590-1402 supports 10Base-T / 100Base-T interface to access to an embedded serial port. service, eCable client service and so on, are securely established by TLS encryption. • Wi-Fi security by WPA2-PSK AES CCMP encryption. • TCP port serial and eCable client services with TLS encryption • Secure firmware update over HTTPS • Secure connection to configuration web GUI over HTTPS • Secure boot from signed firmware Embedded system with Ethernet SX-590-1402 Ethernet Network backbone ■ eCable mode: Embedded serial devices communicate with each other through SX-590-1402’s network interface. One acts as receiver and the other acts as transmitter. The eCable mode client SX-590-1402 uses a low power CPU, i.MX 6ULL, which reduces the over all system power consumption. It also supports service operates in TLS encrypted mode when FIPS 140-2 mode is enabled. additional power management features which help reduce power usage during periods of inactivity. • Fast Boot Hardware boot times between 10 – 15 seconds Ethernet Network backbone Serial communication over

FIPS 802.11ac Intelligent Module • Wi-Fi adapter utilizing existing Ethernet port An Ethernet port on a SoC (System-on-Chip) can be converted to Wi-Fi interface by SX-590-1402 Ethernet to WiFi bridge feature. > Application Medical uipme Office Equipment in Government facilities The Silex SX-590-1402-EVK-WWR makes it easy to evaluate the hardware/software of our SX-590-1402 system module. * Minimum height using lowest profile mating connector. • Interface board • WLAN Pole antenna FIPS compliant off-the-shelf product • FIPS 140-2 product enabled by SX-590-1402 • Serial to Ethernet / Wi-Fi communication...