Catalogs >
SIKO GmbH >
Absolute encoder WV5800M

Absolute encoder WV5800M
1 / 4Pages

Catalog excerpts

Absolute encoder WV5800M absolute magnetic rotary encoder with solid shaft status LEDs shaft design 2 RotoLine | 2.2 Absolute rotary encoders CANopen (DS406) or SAE J1939 interface Salt-spray resistant housing available High electro-magnetic compatibility With PURE.MOBILE technology Optional: Inclination sensor, bus address adjustable via rotary switch, digital I/O E1 Approval by the German Federal Office for Motor Vehicles single turn or multiturn variant available

Open the catalog to page 1

Absolute encoder WV5800M absolute magnetic rotary encoder with solid shaft Mechanical data Feature Shaft Flange Housing Speed Moment of inertia Starting torque Shaft load rating Cable sheath Cable bending radius Mounting type Weight Technical data stainless steel Aluminum aluminum diecasting ≤6000 rpm ≤3000 rpm ≤8 gcm2 ≤2 Ncm ≤80 N ≤40 N PVC >25 mm servo flange ~0.35 kg Additional information Technical data 8 … 36 V DC 20 mA 28 mA 76 mA ≤800 mW 105 cycles three-color LED (red/green/yellow) ±36 V according to ISO 11898-1/2, not electrically isolated 1 … 127 20 kBit/s 50 kBit/s 125 kBit/s 250...

Open the catalog to page 2

Absolute encoder WV5800M absolute magnetic rotary encoder with solid shaft Ambient conditions Feature Ambient temperature Storage temperature Relative humidity EMC Protection category Salt spray test Shock resistance Vibration resistance Additional information condensation permitted immunity to interference/immission interference emission/emission industry immunity requirement, class B emission limit interference radiation ESA transient pulses electrostatic discharge (ESD) EN 60529 fitted with suitable mating connector EN 60529 EN 60068-2-52 (environmental condition SN) EN 60068-2-27, half...

Open the catalog to page 3

Absolute encoder WV5800M absolute magnetic rotary encoder with solid shaft Order Ordering table Feature Number of revolutions Shaft diameter x length ø10 mm, length 20 mm ø6 mm,length 10 mm notch pin, ø10 mm, length 26 mm featherkey, ø10 mm, length 20 mm Mounting type servo flange, ø58 mm servo flange, ø88 mm Ambient conditions standard salt spray tested housing Protection category open cable end Bus IN/Bus OUT Bus IN Cable length without rotary switch, address, baud rate inclination sensor, 1 axis redundant inclination sensor, 1 axis Additional information subject to technical alteration ●...

Open the catalog to page 4

Absolute encoder WV5800M 1 / 4Pages

Catalog excerpts

All SIKO GmbH catalogs and technical brochures

Absolute encoder WV5800M
1 / 4Pages