Sikadur®-30 Adhesive for bonding reinforcement
6Pages

Adhesive for bonding reinforcement ® Product Description Sikadur -30 is a thixotropic, structural two part adhesive, based on a combination of epoxy resins and special filler, designed for use at normal temperatures between +8° and +35° C C. Adhesive for bonding structural reinforcement, particularly in structural strengthening works. Including: ® Sika CarboDur Plates to concrete, brickwork and timber ® ® (for details see the Sika CarboDur Product Data Sheet, the “Method Statement ® ® for Sika CarboDur Externally Bonded Reinforcement” Ref: 850 41 05 and the ® ® “Method Statement for Sika CarboDur Near Surface Mounted Reinforcement” Ref: 850 41 07). ® Steel plates to concrete (for details see the relevant Sika Technical information). Characteristics / Advantages Sikadur -30 has the following advantages: Easy to mix and apply. No primer needed. High creep resistance under permanent load. Very good adhesion to concrete, masonry, stonework, steel, cast iron, ® ® aluminium, timber and Sika CarboDur Plates. Hardening is not affected by high humidity. High strength adhesive. Thixotropic: non-sag in vertical and overhead applications. Hardens without shrinkage. Different coloured components (for mixing control). High initial and ultimate mechanical resistance. High abrasion and shock resistance. Impermeable to liquids and water vapour. Tests Approval / Standards Deutsches Institut für Bautechnik Z-36.12-29, 2006: General construction ® ® authorisation for Sika CarboDur . IBMB, TU Braunschweig, test report No. 1871/0054, 1994: Approval for ® Sikadur -30 Epoxy adhesive. ® IBMB, TU Braunschweig, test report No. 1734/6434, 1995: Testing for Sikadur -41 ® Epoxy mortar in combination with Sikadur -30 Epoxy adhesive for bonding of steel plates. Testing according to EN 1504-4

Product Data Form Colours Part A: Part B: Parts A+B mixed: 6 kg (A+B): pre-batched unit, pallets of 480 kg (80 x 6 kg). white black light grey Not pre-dosed industrial packaging (pallets at 14 pails): Part A: 30 kg pails Part B: 10 kg pails Storage Storage Conditions / Shelf-Life 24 months from date of production if stored properly in original unopened, sealed and undamaged packaging in dry conditions at temperatures between +5° and C +30° Protect from direct sunlight. C. Technical Data Chemical Base Epoxy resin. (According to FIP (Fédération Internationale de la Précontrainte)) On vertical...

Mechanical / Physical Properties Compressive Strength (According to EN 196) Curing temperature Curing time 12 hours Shear Strength (According to FIP 5.15) Curing temperature Curing time Tensile Strength (According to DIN 53455) Curing temperature Curing time 1 day Bond Strength (According to DIN EN 24624) On steel > 21 N/mm (mean values > 30 N/mm ) on correctly prepared substrate, ie. blastcleaned to Sa. 2.5 On concrete: (According to FIP (Fédération Internationale de la Précontrainte)) 2 concrete failure (> 4 N/mm ) E-Modulus Compressive: Tensile: (According to ASTM D695) (initial,...

Application Conditions / Limitations Substrate Temperature Ambient Temperature Material Temperature Sikadur -30 must be applied at temperatures between +8° an d +35° C C. Substrate Moisture Content When applied to mat damp concrete, brush the adhesive well into the substrate. Substrate temperature during application must be at least 3° above dew point. C Application Instructions Mixing Part A : part B = 3 : 1 by weight or volume When using bulk material the exact mixing ratio must be safeguarded by accurately weighing and dosing each component. Mixing Time Pre-batched units: Mix parts A+B...

Value Base All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. Local Restrictions Please note that as a result of specific local regulations the performance of this product may vary from country to country. Please consult the local Product Data Sheet for the exact description of the application fields. Health and Safety Information For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet...

0921 Sika Schweiz AG Tueffenwies 16-22 CH - 8048 Zuerich 1001 1) EN 1504-4 Structural bonding product for bonded plate reinforcement for uses other than low performance requirements ≥ 14 N/mm Shear strength: Compressive strength Shrinkage / expansion: Bond/adhesion strength: Slant shear strength at: (steel) Coefficient of thermal expansion: Glass transition temperature: Reaction to fire Dangerous substances: Last two digits of the year in which the marking was affixed Identification number of the notified body Number of European standard Sika Limited Watchmead Welwyn Garden City...