PRODUCT DATA SHEET SikaRapid®-800 P Hardening Accelerator DESCRIPTION CHARACTERISTICS / ADVANTAGES SikaRapid®-800 P is a hardening accelerator in powder form for cementitious dry mortar and concrete. SikaRapid®-800 P develops after a few hours very high strengths. SikaRapid®-800 P provides the following advantages through accelerated hardening of mortar / concrete within 20 min to 2 hours depending on mix design, fresh mortar temperature and curing conditions: ▪ workability time 10 – 15 min ▪ end of hardening 15-18 min ▪ aprrox. 25 MPa after 24 h at 20°C in concrete ▪ good strength development even below 10°C ▪ adjustable workability with retarder up to 1 hour SikaRapid®-800 P does not contain chlorides, nitrates or any other ingredients which promote the corrosion of steel. It is therefore suitable for use in reinforced and prestressed concrete structures. USES SikaRapid®-800 P is especially suitable for any application where high early strength development plays a major role, or is of crucial importance within the first hours. SikaRapid®-800 P is used but is not limited for the following applications: ▪ rapid setting fixing mortars and grouts for fast loading ▪ precast elements for early demoulding and fast removal ▪ fast setting foam mortar ▪ fast setting tile adhesive ▪ fast setting post fix dry mortar PRODUCT INFORMATION Composition Compound of anorganic components Appearance / Colour light grey powder Shelf life 12 months shelf life from date of production if stored in dry conditions in undamaged, unopened, original sealed packaging. Storage conditions Dry storage at temperatures up to +30°C. Protect from direct sunlight. Bulk Density Total Chloride Ion Content Equivalent Sodium Oxide PRODUCT DATA SHEET SikaRapid®-800 P May 2020, Versio
Open the catalog to page 1APPLICATION INFORMATION Recommended Dosage Up to 5 % by weight of cement (according to the target accelerating effect) Note: Preliminary testing is required to determine the exact dosage for specific conditions. Please contact Sika technical service for more information and advice. SikaRapid®-800 P may be combined with many other Sika products like Sika® ViscoCrete®. To adjust begin of setting, the addition of a retarder is recommended. Note: Always conduct trials before combining products in specific mixes and contact Sika technical service for information and advice about any specific combinations....
Open the catalog to page 22 Pages
2 Pages
2 Pages
3 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
8 Pages
2 Pages
15 Pages
14 Pages
3 Pages
3 Pages
9 Pages
2 Pages
3 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
6 Pages
6 Pages
3 Pages
4 Pages
8 Pages
4 Pages
2 Pages
2 Pages
9 Pages
2 Pages
2 Pages
12 Pages