M330

M330

M330

Product catalog summary
Product Overview: SikaBlock® M330 is a model board used in the manufacture of design and styling models, substructures for cubing, data control models, and simple laminating molds. It is characterized by a very fine, dense surface, easy workability, low dust formation, and availability in large dimensions.
Physical Specifications: The board has a density of 0.24 g/cm³, Shore hardness of D 25, flexural strength of 5 MPa, E-Modulus of 150 MPa, compressive strength of 4 MPa, and a heat distortion temperature between 55 - 60°C. The linear thermal expansion coefficient is 65 x 10-6 K-1.
Processing Data: The product uses Biresin® Foam Adhesive, Biresin® Kleber orange, and Biresin® Spachtel orange as adhesives and fillers. The mixing ratios and pot life vary depending on the component system used.
Processing Instructions: The material should be acclimatized to 18 - 25°C before machining. It can be machined by sawing, milling, or drilling. Bonding areas must be clean and free of contaminants. For surface corrections, Biresin® Spachtel orange is recommended.
Storage and Handling: SikaBlock® M330 has an unlimited shelf life when stored flat in dry conditions. Temperature variations during storage and transport should be minimized. Safety data sheets should be consulted for safe handling and disposal.
Packaging: The product is available in various dimensions and packaging sizes, with specific quantities per pallet or box.
Legal and Safety Notices: Users must test the product's suitability for their specific application. Sika provides no warranty for merchantability or fitness for a particular purpose. Users should refer to the most recent product data sheets and comply with local regulations for disposal and recycling.
See more

Catalog excerpts

M330-1

Product Data Sheet Version 09 / 2011 SikaBlock® M330 Areas of Application Product Benefits Manufacture of design and styling models Manufacture of substructure for cubing and data control models Simple laminating moulds Very fine, dense surface Easily workable Very low dust formation Big dimensions Basis Adhesive Adhesive Filler Hard polyurethane foam, siena Biresin ® Foam Adhesive, one-component-PUR-system Biresin ® Kleber orange, two-component-PUR-system Biresin ® Spachtel orange, two-component-polyester-system Physical Data (approx. values) SikaBlock® M330 Density Shore hardness Flexural strength Compressive strength Heat distortion temperature Linear thermal expansion coefficient αT Processing Data Biresin ® Foam Adhesive Adhesive / Filler Mixing ratio Setting time Biresin ® Kleber orange Biresin ® Spachtel orange Packaging Board materials Biresin® Foam Adhesive Biresin® Kleber orange, resin Biresin® G53, hardener Biresin® Spachtel orange, resin BPO-Paste, hardener 1500 mm x 500 mm x 50 mm, 25 pieces / pallet 1500 mm x 500 mm x 100 mm, 12 pieces / pallet 1500 mm x 500 mm x 200 mm, 6 pieces / pallet 2000 mm x 1000 mm x 50 mm, 25 pieces / pallet 2000 mm x 1000 mm x 100 mm, 12 pieces / pallet 2000 mm x 1000 mm x 150 mm, 8 pieces / pallet 2000 mm x 1000 mm x 200 mm, 6 pieces / pallet 2000 mm x 1000 mm x 250 mm, 4 pieces / pallet other dimensions on request 0,75 l, 12 pieces / box 1.5 kg net 4 kg; 0,975 kg net 6 x 1.26 kg net resin tins in a box 6 x 0.04 kg net tubes in a box Tooling & Composites Model board

 Open the catalog to page 1
M330-2

The material must be acclimatised to 18 - 25°C prior to machining. Machining of the block is easily accomplished by sawing, milling or drilling with machines or by hand. For bondings use e. g. Biresin® Foam Adhesive or Biresin® Kleber orange (for more information see Product Data Sheet). Bonding areas must be clean, dry and free of dust and grease or oil. For more information about milling please seek advice from cutting tool manufacturer or our separate leaflet. For correction or finishing of surface use Biresin ® Spachtel orange (for more information see Product Data Sheet). Product has un-limited...

 Open the catalog to page 2

All Sika Deutschland catalogs and technical brochures

Archived catalogs

  1. Biresin CR

    2  Pages

  2. Biresin® M72

    2  Pages

  3. Biresin® M60

    2  Pages

  4. Biresin® S5

    2  Pages

  5. Biresin® L89

    2  Pages

  6. Imagebrochure

    8  Pages

  7. M1000g

    2  Pages

  8. M73

    3  Pages

  9. M700

    2  Pages

  10. M650

    2  Pages

  11. M450

    2  Pages

  12. M440

    2  Pages

  13. M150

    2  Pages

  14. u1419

    2  Pages

  15. VG70

    2  Pages

  16. M75

    2  Pages

  17. Biresin® G26

    2  Pages

  18. Biresin® S15

    2  Pages

  19. Biresin® M67

    2  Pages

  20. M72

    2  Pages

  21. Biresin® LS

    2  Pages

  22. CR80

    6  Pages

  23. CR170

    3  Pages

  24. additive

    4  Pages

  25. retardan-l

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.