Product Data Sheet Vacuum Casting resin Product Benefits Manufacture of tough-hard and flexible prototype Manufacture of abrasion and impact stressed mouldings in production facility Simulation of soft-PVC, PE and rubber Fast curing with good flowability Tough-hard and very flexible High tear strength High rebound elasticity Dyeablewith Biresin®-Farbpasten Biresin®U1419, polyol, yellowish-transparent, unfilled Biresin®U1419, MDI-based isocyanate, amber, unfilled * dependent on raw materials the colour can differ without different mechanical properties Working packages Individual components

■ The material temperature must be 18 - 25°C. ■ The resin component must be stirred thoroughly before use. ■ Both components must be under vacuum for several minutes before mixing in right mixing ratio and poured into preheated moulds (70°C). ■ After complete filling of the moulds, vacuum is switched off and moulds are placed in an oven at 70°C for curing until demoulding. ■ Minimum shelf life is 6 month under room condition (18 - 25°C), when stored in original un-opened ■ After prolonged storage at low temperature, crystallisation of components may occur. This is easily removed by warming up...