Product Data Sheet Model paste Product Benefits With hardener Biresin® M60 as hand applicable epoxy paste for manufacturing of master models in car body construction and in model making With hardener Biresin® F4 for casting With hardener Biresin®S10 for correcting work or bonding applications with faster setting Specific lightweight paste Easily workable Good edge stability Setting with low shrinkage One resin component with special hardeners for different applications Biresin® M60, epoxy resin, brown, filled, pasty Biresin® M60, amine, white, filled, pasty Biresin® S10, amine, amber, unfilled, medium viscous Biresin® F4, amine, colourless, unfilled, low viscous Biresin®Spachtel braun, two-component-polyester-system Processing Data Physical Data (approx. values)

Individual components Biresin® Spachtel braun, resin BPO-Paste, hardener The material, processing and surface temperature must be from 18 to 25°C. Mix the resin and hardener components until a uniform colour is reached. For filling, bonding and coating the areas must be clean, dry and free of dust and grease or oil. On vertical surfaces it is possible to apply Biresin® M60 up to 5 mm with good non sag properties. With an additional amount of 2-3% Stellmittel T to the prepared mix, layers of up to 20 - 25 mm can be applied. Biresin® M60 with hardener Biresin® P7 (mixing ratio in pbw: 100 : 15)...