Product Data Sheet Laminating paste Product Benefits ■ Reinforcement of big negatives, models, moulds ■ Construction of difficult reinforcement layers ■ Construction of true-to-size laminate resp. reinforcement layers Easily mixing with coloured hardener component Very smooth and good adhesion For light-weight laminates with high dimensional Mixtures are emulsifiable with water under uncured conditions Curing without strain and with low heat build-up Cured lamináis can be machined □ Resin Biresin® L89, epoxy resin, grey, filled ■ Hardener Biresin® L89, amine, blue, unfilled Individual components

■ The material, processing and mould temperature must be from 18 to 25°C. ■ The haderner component must be shaken thoroughly before use . □ Optimal mixing of resin and hardener component is possible with mechanical mixers; small amounts i. e. ■ Complete mixing of the components is shown by a uniform colour. ■ Prolonged mixing may raise the temperature of the reaction mass and shorten the potlife. ■ Larger amounts which can not be applied quickly spread out on a flat sheet. ■ Put on ready mixed laminating paste on the partially gelled surface resin or coupling layer in an even layer. □ Smooth...