Battery-Operated Tools For plastic strapping Battery-Operated Tension-Weld® The BXT combination tool applies polyester strapping, utilizing friction weld joint technology to join the strap ends. The battery-operated BXT has a simple two-button process and ergonomic design to reduce operator fatigue. Rechargeable battery pack Strap Type Tenax Joint Type Applied Tension Dispensers For plastic strapping Floor model with straptroller. Can be suspended overhead. Strap Dispenser Model For typical shipping room. Easily loaded. Part Number Strap Size For power equipment. Dancer arm and brake. Base sold separately (Part No. 024360). Designed for use with high-strength polyester strapping. Tool tray For typical shipping room. Easily loaded. Can be suspended from-a wall or ceiling. Dimensions Width Dispenser Weight * Dispenser can be used with both steel and plastic strapping. Pneumatic tool accessories All new Signode pneumatic tools are supplied with a quick-disconnect plug. A filter and regulator are needed with all Signode pneumatic sealers. A filter-regulator-lubricator is needed with pneumatic tensioners and combination tools. These additional fittings and air hoses are available from Signode to help provide optimum operation. Recommended air hose for pneumatic tools: 10' x 1/2" (3.0 m x 12 mm) i.d. (Part No. 424774) Note: Use light hydraulic oil in lubricator, such as Non-Fluid Oil No. LS-1236 (Part No. 008556) or equivalent. Filter-Regulator-Lubricator assembly (Part No. 424773) Quick-disconnect socket 3/8" (9.5mm) i.d. (Part No. 008569). Lubricator fitting for hose connection. Quick-disconnect socket 1/4" (6.4mm) i.d. (Part No. 020706). Hose fitting for tool connection. Pressure regulator Filter Lubricator Regulator mounting bracket (Part No. 071982) Quick-disconnect plug 1/4" (6.4mm) i.d. (Part No. 008568). Hose fitting for lubricator connection. Quick-disconnect plug 1/4" (6.4mm) i.d. (Part No. 020704). Tool fitting for hose connection. Y-fitting (Part No. 008574) for operating two tools simultaneously.