250 Portable cooler dryer

Product catalog summary

Overview: The Signal Group 250 Portable cooler dryer is designed to remove water vapour from stack and exhaust emission gases before analysis by ambient analysers. This prevents errors due to water interference and condensation inside the analyser.

Key Features:

Utilizes a semiconductor Peltier cooling system with an aluminium cooling block.
Includes a high-efficiency stainless steel heat exchanger.
Condensed water is removed via a continuous peristaltic pump.
Status is indicated by an LED system with alarms for high temperature, water presence, and temperature maintenance.

Specifications:

Configuration: Single channel
Inlet: Maximum temperature of 210°C
Outlet: Sample dewpoint at 5°C ± 0.5°C; hot air exhausted to ambient; condensate pumped to drain
Flow Rate: Maximum of 3 l/min
Plumbing: 1/4” tube fittings for gas samples; 1/4” stainless steel for condensate drain
Power: Voltage rating of 115 Vac or 230 Vac; consumption of 180VA maximum
Environment: Ambient temperature range of +5°C to 35°C; maximum humidity of 95% RH non-condensing
Front Panel: Includes mains power on/off switch and LED indicators for status, high/low temperature alarms, water alarm, and power
Alarms: High temperature, low temperature, and water condensate presence
Dimensions: 630mm x 500mm x 400mm
Weight: 15kg

Additional Product: The 200SM cooler dryer is available as a 1, 2, or 3 channel unit.

Catalog excerpts

Portable cooler dryer The Signal Group 250 Portable cooler dryer removes water vapour from stack and exhaust emission gases, before analysis by ambient analysers. Ancillary products working alongside our gas analysers

Open the catalog to page 1

250 Cooler dryer SPECIFICATIONS The Signal Group 250 Portable cooler dryer removes water vapour from stack and exhaust emission gases, before analysis by ambient analysers. Errors due to water interference are removed and condensation is prevented from occurring inside the analyser. The 250 features a semiconductor Peltier cooling system with an aluminium cooling block. Fitted into the block is then a high efficiency heat exchanger made of stainless steel. The condensed water is then removed using a continuous peristaltic pump. The status of the cooler is indicated by an LED system with high...

Open the catalog to page 2

250 Portable cooler dryer

250 Portable cooler dryer

Catalog excerpts

All Signal Group Ltd catalogs and technical brochures