Electrical Requirements Supply voltage Supply voltage range with 6 safe inputs 1 double clock output signal (short circuit proof) Current consumption (+24 V power supply, own consumption) The Safety Input Box SIB 061 has the Safety integrity level SIL3 (EN / IEC 62061) or Performancelevel e (PL e) (EN ISO 13849-1/-2). The Safety inputs are used for reading 6 actuator signals (Emergency Stop, confirmation button etc.). To test inputs and detect crossed circuits (e.g. Emergency Stop), the SIB 061 has 2 non-safe signal outputs, TA and TB. Baud rate Terminating resistor Article Number and Miscellaneous Article number Dimensions Environmental Conditions Storage temperature Environmental temperature Humidity Installation altitude above sea level Input Specifications Number Input voltage Input voltage range Signal level Input current Input delay Rated output voltage Output voltage range Signal Output Cross-Circuit Detection Specifications Number 0-2000 m without derating > 2000 m with derating of the maximum environmental temperature by 0.5 °C per 100 m Operating conditions Switching threshold pollution degree 2 in accordance with 61000-6-7:2015 (Generic standards - Immunity requirements for equipment intended to perform functions in safety-related systems (functional safety) at industrial locations) in accordance with EN 61000-6-2:2007 (industrial area) (increased requirements in accordance with IEC 62061) in accordance with EN 61000-6-4:2007 (industrial area) Vibration resistance Shock resistance Protection type Output current short-circuit proof