S-DIAS Safety Digital Input Module Electrical Requirements Voltage supply from Safety bus Current consumption on the Safety bus (+12 V power supply) with 10 secure inputs 1 redundant output signal (short-circuit proof) Voltage supply from Safety bus Current consumption on the Safety bus (+24 V power supply) Article Number and Miscellaneous The S-DIAS SDI 101 Safety digital input module has the safety integrity level SIL3 (EN / IEC 62061) or Performancelevel e (PL e) (EN ISO 13849-1/-2). To test inputs and detect cross circuits (e.g. Emergency Stop), the SDI 101 has two non-safe signal outputs, TA and TB. Article number Dimensions Environmental Conditions Storage temperature Environmental temperature Humidity Installation altitude above sea level 0-95 %, non-condensing 0-2000 m without derating > 2000 m with derating of the maximum environmental temperature by 0.5 °C per 100 m Operating conditions EMC resistance Input Specifications Number Input voltage Input voltage range Signal level pollution degree 2 in accordance with 61000-6-7:2015 (Generic standards - Immunity requirements for equipment intended to perform functions in safety-related systems (functional safety) at industrial locations) in accordance with EN 61000-6-2:2007 (industrial area) (increased requirements in accordance with IEC 62061) in accordance with EN 61000-6-4:2007 (industrial area) Vibration resistance Switching threshold Shock resistance Input current Protection type Input delay Signal Output Cross-Circuit Detection Specifications Number Rated output voltage Output voltage range Output current short-circuit proof