HUMAN MACHINE INTERFACES

Philosophy Multi-touch Operating Panels HMIs in Two or More CPU Bundle Single-touch Operating Panels Control Panels Mobile Panels Visualization Software HMIs Sorted by Size Overview Matrix

For the human-machine interface, the following applies: it should be modern, clear and above all, userfriendly. HMI PHILOSOPHY Depending on the scope and complexity of your application, you can choose between operating, control and mobile panels – naturally, with different display sizes. In view of networked, intelligent factories, we focus on flexible two and multi-CPU solutions. Meaning a separation between visualization, sequence and motion control. Our operating panels with single or multi-touch screen form, combined with the compact S-DIAS control and I/O system, an efficient, highperformance...

GET IN MULTI-TOUCH OPERATING COMFORT MEETS „ZEITGEIST“ Multi-touch operating panels give machines and systems a modern face and enable smart operating concepts, which provide a positive user experience. In the new multi-touch HMIs from SIGMATEK, projective capacitive touch technology (PCT) is used, by which the sensors are protected on the back of the robust, solid glass front (IP65 protection). The projective capacitive touch technology enables intuitive operation with multi-finger input, which can be used for more Safety in handling machines and equipment. For example, when two buttons must...

HOT FACTS MODERN projective capacitive multi-touch (PCT technology), wide screen FLEXIBLE with an attachable CPU or HMI-Link unit OPEN simple system integration with 2x Ethernet, 1x USB 2.0, 1x USB-OTG, OPC UA connectivity Flexibility: Whether EDGE2 Technology, x86 processor or HMI-Link unit, the HMIs can be easily upgraded when installed. The widescreen panels cut a good figure in both portrait and landscape format. OPC UA All SIGMATEK operating panels with a processor support OPC UA communication. The OPC UA server, as well as the client function can be used to connect a higher-level system...

HOT FACTS MODERN projective capacitive multi-touch (PCT technology) OPEN with standard interfaces such as Ethernet, CAN or USB, as well as OPC UA connectivity POWERFUL with EDGE2 Technology dual-core processor ER HDD RUN HMI-LINK: REMOTE SOLUTIONS FOR UP TO 100 M One cable, more power and long distances – those are the advantages of HMI-Link technology, which was developed for remote solutions. With a standard Cat5e or Cat6 cable, video (full HD), audio and USB signals can be transmitted up to 100 meters between operating panels and the industrial PCs from the 400 series free of loss. HMI-Link...

MULTI-TOUCH IN 4:3 FORMAT MODERN AND WITH ADDED VALUE With the high-performance HMIs in 4:3 format, demanding visualization tasks can be implemented comfortably and efficiently. The ETT multi-touch panels in classic 4:3 format enable intuitive gesture and multi-finger operation. Equipped with an ARM-based EDGE2 Technology dual-core processor, the ETT panels provide high performance with low power usage and do not require a cooling fan. 512 MB of DDR RAM for internal program and data storage, a 512-MB microSD memory for recipe and alarm management, data logging, as well as a 3D graphic accelerator...

With the ETT panels, the interfaces are located on the bottom. The Safety Input Box SIB 061, with 6 digital Safety inputs for decentralized reading of up to 3 command and signaling devices (2-channel), can be simply mounted onto the back of the ETT. ETTs Easily Find a Connection The interfaces are selected to ensure that the HMIs fit in practically any machine and system configuration: 2x Ethernet, 2x USB 2.0, 1x USB-OTG (On-the-Go) and 1x CAN-Bus. 8 digital in and outputs each are also on board, which can be used for command and signaling devices such as signal towers and operating mode switches....

TWO- AND MULTI-CPU SOLUTIONS FIT FOR THE CHALLENGE OF INDUSTRY 4.0 With Smart Factories and Industry 4.0 in sight, we focus – especially for complex applications – on modular, decentralized control solutions that make your machines future-proof. With a single-CPU solution, the danger exists that in the course of its life cycle, the CPU may reach its performance limits as application are expanded. Through a clean separation of sequence control and visualization, you are holding reins. Modular into the Future With modular, decentralized automation solutions, the computing power can be scaled as...

OUR CLASSICS OPERATING PANELS WITH RESISTIVE TOUCH SCREENS While developing our resistive operating panels, we focused on a compact design and usability. The selection of our operating panels, which are always equipped with high-resolution, resistive TFT color touch screens range from 3.5-inch small format to 19 inches in portrait format. Interfaces such as Ethernet, CAN, USB, HMI-Link, display port and RS232 ensure that the operating panels find the right connection. Comfortable Extras For extensive visualization tasks, operating panels with wide screen and EDGE2 Technology processors are available...

CONTROL PANELS CONTROL CPU IS ON BOARD The ETV control panels are compact all-rounders. They save space in the cabinet, since the control is integrated in the HMI and can be comfortably programmed. Control, visualization and operation in one thin device – the all-in-one control panels with integrated CPU and resistive color touch screen are an efficient and economical solution for medium-complexity applications. With allin-one panels of the ETV series as a central control unit, flexible expansion of the application is limited. With our fanless ETV control panels, lowloss EDGE Technology processors...

HOT FACTS OPERATING FREEDOM with cable or wireless (WLAN) WORK FATIGUE-FREE ergonomic design and low weight (950 –1,350 g) RELIABLE OPERATION Safety elements integrated HUMAN MACHINE INTERFACES

MOBILE PANELS FREEDOM DIRECTLY ON-SITE If operating and monitoring demands mobility, our handheld operating panels are the right choice. Equipped with an 8.4, 10.1 or 10.4-inch color touch display, the mobile HMIs offer the ability to intervene directly on site. The compact panels with their robust housing concept are available in different configurations. HBG panels: for classic operating and monitoring with integrated HMI-Link (loss-free data transfer up to a 100 m distance). HGT panels: are equipped with EDGE2 Technology processor and interfaces such as VARAN, Ethernet and USB. The wireless...