1. Catalogs
  2. Siglent Technologies Co., Ltd
  3. SSA3000X Series Datasheet+Siglent+Spectrum Analyzer

SSA3000X Series Datasheet+Siglent+Spectrum Analyzer

SSA3000X Series Datasheet+Siglent+Spectrum Analyzer

SSA3000X Series Datasheet+Siglent+Spectrum Analyzer

Product catalog summary
General Description: The SSA3000X series spectrum analyzers by Siglent offer a frequency range from 9 kHz to 2.1 GHz or 3.2 GHz. They are lightweight, compact, and user-friendly, featuring a bright display and reliable automatic measurements. These analyzers are suitable for various applications including R&D, education, production, and maintenance.
Features and Benefits: The SSA3000X series utilizes all-digital IF technology and provides a frequency range up to 3.2 GHz. Key features include a displayed average noise level of -161 dBm/Hz, phase noise of -98 dBc/Hz at 10 kHz offset, total amplitude accuracy of less than 0.7 dB, and a minimum resolution bandwidth of 10 Hz. Optional kits for tracking generator, reflection measurement, advanced measurement, and EMI pre-compliance testing are available.
Specifications: The SSA3032X model covers 9 kHz to 3.2 GHz, while the SSA3021X covers 9 kHz to 2.1 GHz. Both models offer a resolution bandwidth from 10 Hz to 1 MHz and a displayed average noise level of -161 dBm/Hz. The phase noise is less than -98 dBc/Hz at 1 GHz with a 10 kHz offset. Amplitude precision is less than 0.7 dB.
Design Features: The analyzers support four independent traces and cursors, demodulation at zero span, and advanced power measurement capabilities. They also feature a 10.1-inch WVGA display.
Technical Specifications: The frequency range for the SSA3032X is 9 kHz to 3.2 GHz and for the SSA3021X is 9 kHz to 2.1 GHz. The internal reference source has a frequency of 10 MHz with an accuracy of less than 1 ppm. The resolution bandwidth ranges from 10 Hz to 1 MHz, and the video bandwidth ranges from 1 Hz to 3 MHz.
Amplitude Characteristics: The measurement range extends from the displayed average noise level to +20 dBm. The preamplifier provides a nominal gain of 20 dB. The maximum input DC voltage is ±50 VDC, and the maximum series RF power is 33 dBm for 3 minutes with input attenuation greater than 20 dB.
Sweep and Trigger: Sweep time ranges from 1 ms to 3000 s with modes including sweep and FFT. Trigger sources include free, video, and external, with an external trigger level of 5V TTL.
Options and Accessories: Optional software kits include tracking generator, advanced measurement, and EMI measurement kits. Accessories include various cables, adaptors, and a soft carrying bag.
General Specifications: The display is a 10.1-inch TFT LCD with a resolution of 1024x600. The device supports USB and LAN communication interfaces. It operates within a temperature range of 0°C to 50°C and has a storage capacity of 256 MB internally and up to 32 GB externally.
Compliance and Safety: The SSA3000X series complies with EMC standard EN 61326-1:2013 and electrical safety standard EN 61010-1:2010.
About SIGLENT: SIGLENT is a high-tech company specializing in electronic test and measurement instruments. Since its inception in 2002, SIGLENT has expanded its product line to include various test instruments and is recognized as a leading manufacturer of digital oscilloscopes.
See more

Catalog excerpts

SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-2

SSA3000X Spectrum Analyzer Data Sheet All-Digital IF Technology Frequency Range from 9 kHz up to 3.2 GHz -161 dBm/Hz Displayed Average Noise Level (Typ.) -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) Total Amplitude Accuracy < 0.7 dB 10 Hz Minimum Resolution Bandwidth (RBW) Standard Preamplifier General Description Siglent’s SSA3000X series of spectrum analyzers Up to 3.2 GHz Tracking Generator Kit (Opt.) Reflection Measurement Kit (Opt.) have a frequency range of 9 KHz to 2.1 GHz / 3.2 GHz. With their light weight, small size, and friendly user interface, the SSA3000s offer a bright easy...

 Open the catalog to page 2
SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-3

SSA3000X Spectrum Analyzer Data Sheet Model and Main index Model Frequency Range Resolution Bandwidth Displayed Average Noise Level Phase Noise Amplitude Precision Design features Support four traces and cursors independently 10 Hz Minimum Resolution Bandwidth (RBW) -151 dBm Displayed Average Noise Level (RBW=10 Hz) Phase noise -98 dBc/Hz@1 GHz, offset 10 kHz Demodulation at the zero span Advanced power measurement, calculate the ACPR parameters

 Open the catalog to page 3
SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-4

SSA3000X Spectrum Analyzer Data Sheet Design features Characteristic curve of the Return Loss EMI filter, Quasi-Peak detector following CISPR 16 Specifications Specification are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0 ℃ to 50 ℃ temperature, and is warmed up 40 minutes. In addition tracking generator indicators, the specifications in this manual include the measurement uncertainty. Technical index:All products guaranteed performance parameters, Apply to 5 ℃ to 45 ℃ temperature range. Typical:80 percent of the...

 Open the catalog to page 4
SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-5

SSA3000X Spectrum Analyzer Data Sheet Amplitude Characteristic Amplitude and Level Measurement range DANL to +10 dBm, 100 kHz~1 MHz, preamplifier off DANL to +20 dBm, 1 MHz~3.2 GHz, preamplifier off Reference level Input attenuation Maximum input DC voltage Maximum series RF power 33 dBm, 3 minutes, input attenuation >20 dB Displayed Average Noise Level (DANL) 20 ℃ ~30 ℃ ,attenuation = 0 dB, sample detector, trace average >50 RBW=10 Hz 9 kHz~100 kHz Phase Noise 20 ℃ ~30 ℃ ,fc=1 GHz Phase noise <-95 dBc/Hz @10 kHz offset, <-98 dBc/Hz (typ.) <-96 dBc/Hz @100 kHz offset,<-97 dBc/Hz (typ.) <-115...

 Open the catalog to page 5
SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-6

SSA3000X Spectrum Analyzer Data Sheet Amplitude Characteristic Distortion and Spurious Responses Second harmonic distortion fc≥50 MHz, mixer level -30dBm, attenuation = 0dB, preamp off, 20 ℃ to 30 ℃ -65 dBc Third-order intercept fc≥50 MHz, two -20 dBm tones at input mixer spaced by 100 kHz, attenuation = 0 dB, preamp off, 20 ℃ to 30 ℃ +10dBm fc≥50 MHz, attenuation = 0 dB, preamp off, 20 ℃ to 30 ℃ >-5 dBm,nom. Residual response input terminated = 50 Ω,attenuation = 0 dB, 20 ℃ to 30 ℃ <-90 dBm,typ. Input related spurious Sweep and Trigger Sweep time Sweep accuracy Accuracy, Speed Sweep mode Sweep...

 Open the catalog to page 6
SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-7

SSA3000X Spectrum Analyzer Data Sheet External input and external output Front panel RF input Front panel TG output External Trigger input Communication Interface USB Host General Specification Display Internal (Flash) 256 MByte, External (USB storage device) 32 GByte Input voltage range (AC) 100 V~240 V, AC frequency supply 45 Hz~440 Hz, Power consumption 30W Working temperature 0 ℃ to 50 ℃ , Storage temperature -20 ℃ to 70 ℃ 0℃ to 30℃ ,≤95% Relative humidity; 30℃ to 50℃ , ≤75% Relative humidity Contain tracking generator 4.60 kg (10.1 lb) Electromagnetic Compatibility and Safety EMC Electrical...

 Open the catalog to page 7
SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-8

SSA3000X Spectrum Analyzer Data Sheet Ordering Information Product Description Product code Standard configurations Order Number A Quick Start, A Product Certification, A Product Certification, A USB Cable, A CD (Including Quick Start, Data Sheet and QG-SSA3000X Application Software) , A Calibration Certificate Tracking Generator Kit (Software) Advanced Measurement Kit (Software) N(M)-N(M) cable N(M)-BNC(M) cable Soft carrying bag EMI Options Utility Kit: N(M)-SMA(M) cable N(M)-N(M) cable N(M)-BNC(F) adaptor(2 pcs) N(M)-SMA(F) adaptor(2 pcs) 10 dB attenuator N(M)-SMA(M) cable Utility Options...

 Open the catalog to page 8
SSA3000X Series Datasheet+Siglent+Spectrum Analyzer-9

Spectrum Analyzer About SIGLENT SIGLENT is an international high-tech company, concentrating on R&D, sales, production and services of electronic test & measurement instruments. SIGLENT first began developing digital oscilloscopes independently in 2002. After more than a decade of continuous development, SIGLENT has extended its product line to include digital oscilloscopes, function/arbitrary waveform generators, digital multimeters, DC power supplies, spectrum analyzers, isolated handheld oscilloscopes and other general purpose test instrumentation. Since its first oscilloscope, the ADS7000...

 Open the catalog to page 9

All Siglent Technologies Co., Ltd catalogs and technical brochures

  1. SDS6000A Series

    21  Pages

  2. SDL1000X Series

    10  Pages

  3. SSM5000A Series

    15  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.