614 Digits Q DCV ACV f02W Freq Scanner 04W Hisense Conti; Temp Fused on Rear Panel CAT I (1000V) CAT II (600V)

Main Function SS Basic Measurement Function • DC Voltage: 200 mV - 1000 V • DC Current: 200 |jA - 10 A • AC Voltage: True-RMS, 200 mV - 750 V • AC Current: True-RMS, 200 jA - 10 A • 2/4-Wire Resistance: 200Q - 100 MQ • Capacitance: 2 nF - 100 mF • Continuity Test: Range is fixed at 2 kQ • Diode Test: Adjustable range is 0 - 4V. • Frequency Measurement: 3 Hz - 1 MHz • Period Measurement: 1 js - 333.33 ms • Temperature: Support for TC and RTD sensors The SDM3065X is a 6 % digit digital (2,200,000 count) multimeter • Max, Min, Average, Standard Deviation,dBm/dB, Relative incorporating a dual-display...

Special Features ES Histogram • Probe Hold

DC Characteristics Accuracy ± (% of reading + % of range) [1] Test Current Or Burden Voltage [1] Specifications are for 90-minute warm-up and 100NPLC integration time. For integration time <100NPLC, add the appropriate "RMS Noise Adder" listed in the following table. [2] 10% over range on all ranges except DCV 1000V and DCI 10A range. [3] Relative to calibration standards. [4] For each additional volt over ± 500 V, add 0.03mV error. [5] For continuous current > 7A DC or 7A AC RMS, 30 seconds ON and 30 seconds OFF. [6] Specifications are for 4-wire resistance measurement or 2-wire resistance...

[1] Typical value. -1dBFS, 1k Hz single tone. 100 us aperture time and auto zero off.

Accuracy ± (% of reading + % of range) [1]

Range TCAL °C T C A L °C T C A L °C coefficient [1] Specifications are for 90-minute warm-up, > 3Hz ac filter and sine wave input. [2] 10% over range on all ranges except ACV 750 V and ACI 10 A ranges. [3] Relative to calibration standards. [4] Specifications are for sine wave input >5% of range. For inputs within 1% and 5% of range and <50 kHz, add 0.1% of range additional error. For 50 kHz to 100k Hz, add 0.13% of range additional error. [5] ACV 750 range limited to 8x107 Volt-Hz. For input over 300V rms, add 0.7mV error for each additional volt. [6] For continuous current...

Remarks: [1] Specifications are for 90 minutes warm-up and using REL operation. Additional errors may be caused by non-film capacitors. [2] Specifications are the 1% to 110% of range on 2nF range and 10% to 110% of range on all other ranges WWW.SIGLENT.COM

Function Probe Type Type Optimum 1 Year Temperature Remarks: [1] Specifications are for 90 minutes warm-up. Exclusive of sensor error. [2] Specification is for 4WR sensor measurement or 2WR measurement using REL operation. [3] Relative to cold junction temperature, accuracy is based on ITS-90. Built-in cold junction temperature refers to the temperature inside the banana jack and its accuracy is ± 2.5 °C . Measurement Rate Function Remarks: [1] 20 V range, 1k Hz input. [2] The measurement period changes with the capacitance under test.

Measuring Method and other Characteristics DC Voltage

Detect the power-line frequency automatically at power-on, 400Hz defaults to 50Hz Power Consumption 25VA max Other characteristics

About SIGLENT SIGLENT is an international high-tech company, concentrating on R&D, sales, production and services of electronic test & measurement instruments. SIGLENT first began developing digital oscilloscopes independently in 2002. After more than a decade of continuous development, SIGLENT has extended its product line to include digital oscilloscopes, function/arbitrary waveform generators, digital multimeters, DC power supplies, spectrum analyzers, isolated handheld oscilloscopes and other general purpose test instrumentation. Since its first oscilloscope, the ADS7000 series, was launched...