SDL1000X Series Programmable DC Electronic Load V_Range Current Slew_RIS Slew_FAL , Display Restore DataSheet-2019.10 SIGLENT TECHNOLOGIES CO..LTD

SDL1000X Programmable DC Electronic Load Product Overview SDL1000X/SDL1000X-E series Programmable DC Electronic Load has a 3.5 inch TFT-LCD display, a user-friendly interface and superb performance specifications. The SDL1020X/SDL1020X-E models feature an input range of 150 V/30 A 200 W while the SDL1030X/SDL1030X-E have an input range of 150 V/30 A 300 W. The SDL1000X series leads with measurement resolution of 0.1 mV/0.1 mA and the base SDL1000X-E series resolution is 1 mV/1 mA and adjustable current rise times from 0.001 A/^s~2.5 A/^s. For remote communication and control, the SDL series includes...

SDL1000X Programmable DC Electronic Load Design Features Dynamic test mode up to 25 kHz (CC) Steady state operating mode The SDL features four operating modes to provide flexible test The transient test allows switching between two different load values. capabilities. In CC mode, the electronic load will sink a constant current, A common application is to test the dynamic characteristics of a DC regardless of the voltage at its terminals. In CV mode, the electronic load source or DUT (Device Under Test). The transient test function enables will cause a constant voltage to appear at its terminals....

SDL1000X Programmable DC Electronic Load ES Program function In program (auto-test) mode, you can generate a sequence of tests using different modes, mode parameters and durations. This function is useful for automatically executing a set of tests on a device then display whether the tests passed or failed. Test results are easily viewed by pressing the up and down buttons. The load provides 8 nonvolatile registers to save auto-test file for recall later. Each file contains 1-50 steps to set up. Auto-test function is especially useful in the designing battery charging circuitry. ES Battery discharge...

SDL1000X Programmable DC Electronic Load Voltage Rise/Fall speed test Voltage threshold function The electronic load is also equipped to directly measure voltage rise The SDL1000X can be set to turn on or off if the input voltage is at, and fall times. It can calculate the time from one voltage to another above, or below a set value. By defining these thresholds, you control without the need for additional measurement instrumentation. With an when the load is active. Which minimizes test time and increases safety. SDL1000X, you can save money and improve efficiency. Waveform trend chart function...

SDL1000X Programmable DC Electronic Load Specifications Unless otherwise noted, all specifications are guaranteed within the temperature range of 25°C ± 5 °C with warm-up time of 30 minutes. SDL1020X SDL1020X-E Input Rating (0~40 °C ) CV Mode CC Mode CP Mode *3 Dynamic Model CC Mode T1&T2 Accuracy Current Slew Rate *4 Minimum Rise Time Measuring Range Readback Voltage Input voltage Input current Input power Minimum Operating Voltage (DC) Range Resolution Accuracy Range Resolution Accuracy *2 Range Resolution Accuracy Range Resolution Accuracy Readback Current Readback Power Readback Resistance...

SDL1000X Programmable DC Electronic Load Battery Measurement Battery Input: 0.5~150 V; Max Measurement: Capacity=999 AH Resolution=0.1 mA;Time Range=1 s~24 H Input Resistance >200 kQ Dimension 256 * 115 * 410 (WxHxD mm) SDL1030X SDL1030X-E Input Rating (0~40 °C ) CV Mode CC Mode CR Mode *1 CP Mode *3 Dynamic Model CC Mode T1&T2 Accuracy Current Slew Rate *4 Minimum Rise Time Measuring Range Readback Voltage Input Voltage Input Current Input Power Minimum Operating Voltage (DC) Range Resolution Accuracy Range Resolution Accuracy *2 Range Resolution Accuracy Range Resolution Accuracy Range Resolution...

SDL1000X Programmable DC Electronic Load Range Readback Current Resolution Accuracy Range Readback Power Resolution Accuracy Range Readback Resistance Resolution Protection Range OPP OCP OVP OTP 95 °C Battery Measurement Battery Input: 0.5~150 V; Max Measurement: Capacity=999 AH Resolution=0.1 mA;Time Range=1 s~24 H Input Resistance >200 kn Dimension 256 * 115 * 410 (WxHxD mm) R Range Accuracy Test Condition The input voltage/current value should not be smaller than 10% of the full scale *2 Current Slew rate>0.2 A/us *3 The input voltage/current value should not be smaller than 10% of the full...

SDL1000X Programmable DC Electronic Load USB Cable -1 Quick Start -1 Calibration Certificate -1 Power cord -1 Optional accessories 30 A Test Lead Accessories Description Maximum Current Maximum Voltage Terminal Wire Gauge Length Exterior Design Three-year warranty, excluding accessories.

SDL1000X Series Programmable DC Electronic Load SIGLENT Is an international high-tech company, concentrating on R&D, sales, production and services of electronic test & measurement instruments. SIGLENT first began developing digital oscilloscopes independently in 2002. After more than a decade of continuous development, SIGLENT has extended its product line to include digital oscilloscopes, function/arbitrary waveform generators, RF generators, digital multimeters, DC power supplies, spectrum analyzers, vector network analyzers, isolated handheld oscilloscopes, electronic load and other general...