17006 -DS STERIPleat PTFE
5Pages

{{requestButtons}}

Catalog excerpts

17006 -DS STERIPleat PTFE - 1

STERIPleat PTFE PTFE Membrane Filter Cartridge Used for sterile filtration of gases. Excellent chemical compatibility STERIPleat PTFE cartridges are used for sterile filtration of gases. These cartridges also provide excellent chemical compatibility in solvent and aggressive chemical filtration applications. Typical applications • Food & beverage, Pharmaceutical, Chemicals • CO2 Lines • Tank venting • Solvent filtration • Nitrogen • Sterile air Specification overview Media: PTFE membrane Core, cage, end caps: Available ratings: Steam sterilisation: Chemical sanitisation: Material compliance • FDA approved components • USP Class VI-121ºC Plastic

Open the catalog to page 1
17006 -DS STERIPleat PTFE - 2

STERIPleat PTFE Compatible Sanitary Filter Housings STERALine GT Gas Filter Housing Sanitary grade Pressurised gas lines STERALine Vent Filter Housing Sanitary grade Atmospheric venting Features Media Hydrophobic PTFE Membrane Microbial removal Validated for bacterial removal (P Grade = Integrity Test Grade only) Each unit is preflushed with ultra pure water and integrity tested Fully traceable to raw material lot numbers. Part number laser etched on filter end cap Controlled manufacturing Manufactured in clean room environment Food & beverage, Pharmaceutical, Chemicals Specifications Media...

Open the catalog to page 2
17006 -DS STERIPleat PTFE - 3

STERIPleat PTFE Recommended changeout differential pressure Filter changeout differential pressure Material compliance Material compliance FDA approved components USP Class VI-121ºC Plastics Test BSE/TSE

Open the catalog to page 3
17006 -DS STERIPleat PTFE - 4

Flow curves STERIPleat PTFE Clean air flow rates for a 10” STERIPleat PTFE filter cartridge* 0 b arg Differential pressure (mbar) Flow rate (Nm 3/ hr) *Lab test data. Please contact for specific application questions. Differential pressure (mbar) Clean water flow rates for a 10” STERIPleat PTFE filter cartridge* Flow rate (l/ min) *Lab test data. Please contact for specific application questions.

Open the catalog to page 4
17006 -DS STERIPleat PTFE - 5

Model Code STERIPleat PTFE Product description Filtration Media Hydrophobic PTFE Membrane (Standard grade) 143mm (0.2μm only, all other micron ratings 124mm) Hydrophobic PTFE Membrane (Integrity test grade) Micron Rating Seal Material 0.45 (Available on standard grade media only) Ethylene Propylene 1 (Available on standard grade media only) Other end caps available on request Reinforced end cap (Select this option for sanitisation, sterilisation, autoclaving) © 2019 Siga Filtration (A Division of Siga UK Limited). All rights reserved. Siga Filtration Logo is a trademark and service mark of...

Open the catalog to page 5

All Siga Filtration catalogs and technical brochures

  1. acuraProflow

    1 Pages