SINGLE FILTER F118 Application The Single Filter F118 is a multi-purpose filter for liquid media. It is characterized by high efficiency, a compact footprint as well as quick and easy cleaning. Furthermore, the maintenance and strainer access can be optimized by choosing different filter cover solutions. The degree of contamination can be optionally monitored with various differential pressure indicators. Further options, for example magnetic inserts or the sacrificial anode enable an application-specific customization. Function The standard filter design consists of a cast housing with in-line positioned flanges. The cover is either fixed with a clamp lock or with stud bolts and nuts. The filter is equipped with a basket or ring-type strainer. The medium to be filtered flows through the strainer from the inside to the outside. The strainer is made out of a perforated plate which can be covered optionally with mesh in different mesh sizes. Technical Data In- / outlet: Operating medium: Volume flow: Design pressure: Basket strainer Ring-type strainer 80 – 1000 µm (fabric / perforated plate) 10 – 60 µm ≥ 1 mm (perforated plate) acc. customer’s specification Size: 1 – 8: Cover with clamp lock (type F118) Size: 1 – 10: Cover with stud bolts and nuts (type F118S) Screw (brass) Ball valve (steel, brass, stainless steel) Valve (brass) Ball valve (steel, brass, stainless steel) Flange acc. DIN EN 1092-2 acc. customer’s specification Grade of filtration: Filter cover: Drainage: Ventilation: Connection: Materials Housing and cover: Cover gasket: Strainer (perforated plate / fabric): acc. customer’s specification EPDM, FPM, PTFE, MPQ 1.4571, 1.4571 / 1.4401, brass / Bronze, Hastelloy C4 Surface Treatment Housing inside: Powder coating RAL 5018, corrosion protection primer Rust preventative oil, epoxy coating, Vestosint Housing outside: Synthetic enamel RAL5018, powder coating RAL 5018 Options Differential pressure indicator (optical / electrical), sacrificial anode, magnetic insert Further options and customer specific solutions are available upon request.

Flow capacity * BS = Basket strainer * RS = Ring-type strainer ** Optionally available with flanges in PN16 Larger filter sizes, higher operating pressures as well as further customer specific designs and features are available upon request. The above mentioned flow capacity is valid for inlet velocities of 2,5 m/s in pressure pipes, a viscosity of 1 mPas (water) and a grade of filtration ≥ 80 µm. For suction pipes we recommend half of the above mentioned flow capacity values.