Catalogs >
Siga Filtration >
17010-DS STERIPleat Teflour

17010-DS STERIPleat Teflour
4Pages

Catalog excerpts

STERIPleat TEFLOUR PTFE Membrane in PFA hardware PTFE membrane in chemically resistant PFA hardware for chemical/high temperature applications. STERIPleat TEFLOUR elements provide outstanding chemical resistance in aggressive liquids and gases. These filter elements feature a PTFE membrane and PFA hardware for applications in pharmaceutical, electronics, food and fine chemicals industry. Typical Applications • Sterile venting • Organic solvents • Photoresists, acids, etch solutions Specification overview Filter media PTFE membrane Membrane support PFA Core, cage, end caps PFA Validation and material compliance • Materials meet FDA, Title 21 requirements • BSE/TSE • Tested for Endotoxins, conductiv

Open the catalog to page 1

STERIPleat TEFLOUR Features Applications Photoresists, ozonated water, sterile venting, solvents, acids, etch solutions Controlled manufacturing Manufactured in clean room environment Full fluoropolymer Identification mark and batch number Specifications Micron ratings Available lengths Outer diameter Effective filtration area Construction Filter media PTFE membrane Membrane support Core, cage, end caps Operating conditions Max. operating temperature 5.0 bar @ 20°C (Short term use only) 4.0 bar @ 50°C (Short term use only) 3.0 bar @ 110°C (Short term use only) 1.5 bar @ 170°C Recommended...

Open the catalog to page 2

Flow curves STERIPleat TEFLOUR Liquid flow rates for a 10" TEFLOUR element 0.1µm PRESSURE DROP MBAR FLOW RATE L/MIN 10” long filters were tested using IPA at 21°C. Typical pressure drop values obtained from the tests, with the housing pressure drop deducted, Gas flow rates for a 0.2 micron TEFLOUR element 10" PRESSURE DROP MBAR 0.2μ filters were tested using air at 20°C & 0 bar gauge. Typical pressure drop values obtained from the tests, with the housing pressure drop dedu

Open the catalog to page 3

Model code STERIPleat TEFLOUR Product Description STERIPleat TEFLOUR Filtration Media PTFE Membrane (Standard Grade) Micron rating Seal Material © 2019 Siga Filtration (A Division of Siga UK Limited). All rights reserved. Siga Filtration Logo is a trademark and service mark of Siga UK Limited. All other marks are properties of their respective owners. The contents of this publication are presented for information purposes only, and while every effort has been made to ensure their accuracy, they are not to be used as warranties or guarantees, expressed or implied, regarding the products and...

Open the catalog to page 4

17010-DS STERIPleat Teflour 4Pages

Catalog excerpts

All Siga Filtration catalogs and technical brochures

17010-DS STERIPleat Teflour
4Pages