*mydirectindustry

Catalogs
Siga Filtration
17007- DS STERIPleat Vent

17007- DS STERIPleat Vent

Product catalog summary

Overview: The STERIPleat Vent filters are designed for sterile tank venting and gas filtration, utilizing a hydrophobic PTFE membrane to effectively remove or reduce bacteria. These filters are compatible with STERALine filter housings for both compressed gas and atmospheric venting solutions.

Typical Applications: The filters are suitable for sterile tank venting and gas filtration applications involving CO2, N2, and air.

Specifications:

Media: Hydrophobic PTFE membrane
Core, Cage, End Caps: Polypropylene
Max. Temperature: 80°C
Available Ratings: 0.1, 0.2, 0.45, 1μm
Integrity Testable: Yes (P Grade only)
Sterilisation: Steam, hot water, chemical, and autoclavable
Material Compliance: FDA approved, suitable for food contact

Compatible Filter Housings:

STERALine GT Gas Filter Housing for pressurised gas lines
STERALine Vent Filter Housing for atmospheric venting

Features:

Validated microbial removal for P grade
Integrity tested and flushed with ultra-pure water
Fully traceable to raw material lot numbers
Manufactured in a clean room environment

Construction:

Filtration Media: Hydrophobic PTFE membrane
Support & Drainage Layer: Polypropylene
Core, Cage & End Fittings: Polypropylene with optional reinforced end caps
Gaskets & O-Rings: Various materials including Ethylene Propylene, Silicone, and PTFE

Operating Temperature: Maximum continuous use at 60°C, short-term use at 80°C. Sterilisation at 135°C for 30 minutes (150 cycles) with reinforced end cap option.

Material Compliance: FDA approved components, USP Class VI-121ºC Plastics Test, BSE/TSE compliant.

Model Code: The model code includes details on filtration media, micron rating, end fitting, length, seal material, and optional features like reinforced end caps for sterilisation.

Flow Curves: The document includes flow rate data for a 10” STERIPleat Vent filter cartridge, indicating performance under different pressure conditions.

Catalog excerpts

STERIPleat Vent Sterile tank vent filtration Sterile venting of tanks in food, beverage, cosmetics and pharmaceutical industry STERIPleat Vent filters use a hydrophobic PTFE membrane for the removal/reduction of bacteria in tank venting and gas filtration applications. These filters can be used with our STERALine filter housing range to provide a compressed gas or atmospheric venting solution. STERIPleat Vent filter cartridges can also be used for sterile gas filtration. Typical applications • Sterile tank venting • Gas filtration – CO2, N2, Air Specification overview Media: Hydrophobic PTFE membrane Core, cage, end caps: Available ratings: Integrity testable: Steam sterilisation: Chemical sanitisation: Material compliance • Suitable for food contact • FDA approved c

Open the catalog to page 1

STERIPleat Vent Compatible Filter Housings STERALine GT Gas Filter Housing Sanitary grade Pressurised gas lines STERALine Vent Filter Housing Sanitary grade Atmospheric venting Features Media Hydrophobic PTFE membrane Microbial removal Validated for bacterial removal (P grade only) Flushed with ultra pure water and integrity tested before final assembly Fully traceable to raw material lot numbers. Part number laser etched on filter end cap Controlled manufacturing Manufactured in clean room environment Filtration of process gases and venting Specifications Media grades S = Standard grade P =...

Open the catalog to page 2

STERIPleat Vent Flow curves Clean water flow rates for a 10” STERIPleat Vent filter cartridge* 0barg Differential pressure (mbar) Flow rate (Nm / hr) *Lab test data. Please contact for specific application questions.

Open the catalog to page 3

Model code STERIPleat Vent Product description Filtration Media Hydrophobic PTFE Membrane (Standard grade) 143mm (0.2μm only, all other micron ratings 124mm) Hydrophobic PTFE Membrane (Integrity test grade) Micron Rating Seal Material Ethylene Propylene Other end caps available on request Reinforced end cap (Select this option for sanitisation, sterilisation, autoclaving) © 2019 Siga Filtration (A Division of Siga UK Limited). All rights reserved. Siga Filtration Logo is a trademark and service mark of Siga UK Limited. All other marks are properties of their respective owners. The contents of...

Open the catalog to page 4

17007- DS STERIPleat Vent

17007- DS STERIPleat Vent

Catalog excerpts

All Siga Filtration catalogs and technical brochures