*mydirectindustry

Catalogs
Siga Filtration
17004- DS STERIPleat Nylon

17004- DS STERIPleat Nylon

Product catalog summary

Overview: The STERIPleat Nylon filter cartridge utilizes a naturally hydrophilic Nylon 6,6 membrane designed for effective bacteria removal and reduction. It is integrity testable and complies with US FDA Title 21 and USP Class VI standards.

Applications: The filter is suitable for sterile filtration in industries such as pharmaceuticals, cosmetics, fine chemicals, and electronics.

Specifications:

Media: Pleated Nylon 6,6 membrane
Core, Cage, End Caps: Polypropylene
Maximum Temperature: 80°C
Available Ratings: 0.1, 0.2, 0.45, 0.65μm
Sterilisation: Steam, hot water, chemical sanitisation, and autoclavable
Material Compliance: FDA approved, USP Class VI-121ºC Plastics Test, tested for extractables

Features:

Hydrophilic Nylon 6,6 membrane validated for bacterial removal with a log reduction value greater than 7
Each unit is preflushed with ultra-pure water and integrity tested
Fully traceable to raw material lot numbers with laser-etched part numbers
Manufactured in a clean room environment

Construction:

Filter Membrane: Nylon 6,6
Support & Drainage Layer: Polypropylene
Core, Cage & End Fittings: Polypropylene with optional reinforced end caps
Gaskets & O-Rings: Available in various materials including Ethylene Propylene, FEP encapsulated, Silicone, Viton, Nitrile, PTFE

Operating Conditions:

Maximum Continuous Temperature: 80°C
Sterilisation: Steam and autoclave at 121°C for 15 minutes (40 cycles), hot water at 90°C for 30 minutes

Model Code: The model code for STERIPleat Nylon includes specifications for filtration media, micron rating, end fitting, length, seal material, and optional reinforced end cap for sanitisation and sterilisation.

Flow Curves: The document includes flow rate data for clean water through a 10” STERIPleat Nylon filter cartridge, indicating differential pressure across various micron ratings.

Contact Information: Siga Filtration, Unit 7, Farnborough Business Centre, Eelmoor Road, Farnborough, GU14 7XA, United Kingdom. Email: [email protected], Website: www.sigafiltration.co.uk, Phone: +44 (0) 1276 583 046.

Catalog excerpts

STERIPleat Nylon Nylon 6,6 Membrane Filter Cartridge Sterile filtration of liquids in pharmaceutical industry. Integrity testable media. STERIPleat Nylon cartridges use a naturally hydrophilic Nylon 6,6 membrane for bacteria removal/reduction. These filter cartridge are fully integrity testable and meet US FDA Title 21 and USP Class VI requirements. Typical applications • Sterile filtration • Pharmaceutical, Cosmetics, Fine chemicals, Electronics • Point of use Specification overview Media: Pleated Nylon 6,6 membrane Core, cage, end caps: Available ratings: Steam sterilisation: Chemical sanitisation: Material compliance • FDA approved components • USP Class VI-121ºC Plastics Test • Tested for

Open the catalog to page 1

STERIPleat Nylon Compatible Filter Housings STERALine PBT (316SS) Sanitary grade Single or Multi Cartridge Features Media Hydrophilic Nylon 6,6 Membrane Microbial removal Validated for bacterial removal Each unit is preflushed with ultra pure water and integrity tested Fully traceable to raw material lot numbers. Part number laser etched on filter end cap Controlled manufacturing Manufactured in clean room environment Pharmaceuticals, fine chemicals, electronics, cosmetics Specifications Micron ratings Standard cartridge: 68.50mm Junior cartridge: 56mm Effective filtration area Construction Filter...

Open the catalog to page 2

STERIPleat Nylon Flow curves Clean water flow rates for a 10” STERIPleat Nylon filter cartridge* 0.1μm Differential pressure (mbar) *Lab test data. Please contact for specific application questions.

Open the catalog to page 3

Model code STERIPleat Nylon Product description Seal Material Ethylene Propylene Filtration Media Hydrophilic Nylon 6,6 Membrane (Integrity test grade) Micron Rating Reinforced end cap (Select this option for sanitisation, sterilisation, autoclaving) Code 8 (2 x 222/spear) Other end caps available on request © 2019 Siga Filtration (A Division of Siga UK Limited). All rights reserved. Siga Filtration Logo is a trademark and service mark of Siga UK Limited. All other marks are properties of their respective owners. The contents of this publication are presented for information purposes only, and...

Open the catalog to page 4

17004- DS STERIPleat Nylon

17004- DS STERIPleat Nylon

Catalog excerpts

All Siga Filtration catalogs and technical brochures