FLOWStream FLS Sidestream Filtration System for CHW & LTHW Circuits Efficient removal of particulates with FLOWStream FLS units in recirculating chilled and hot water systems. Easy to use and install. FLOWStream FLS units are userfriendly, low maintenance filters for sidestream filtration applications in the HVAC industry. These systems are supplied fully assembled and ready to use. Once installed, FLOWStream FLS units require minimal maintenance. A DP gauge & reed switch assembly provides visual indication of blocked filters on a coloured dial and sends a filter blocked signal at 90% blockage. A second signal trips the pump at 100% blockage to avoid damage to the filter. A high surface area large diameter filter element provides a long service life. All elements are equipped with a handle for easy installation and removal from filter housing. Optional magnet assemblies provide dual solution for the removal of particulates.

Specifications FLOWStream Models Flow rate 1. BFOS1 or BFOS2 Series Filter Housing 2. Recirculating pump 3. Differential pressure gauge with visual indication 4. External alarm signal of blocked filters at 90% 5. Automatic pump trip at 100% blockage 6. Inlet/outlet shut off valves for maintenance 7. Automatic air vent 8. Set of 4 filters Up to 5 m3/h 1 / 5 / 10 / 20 / 40 / 70 micron With acuraMeltflow or acuraPleat filter elements Stainless steel 6 bar (Higher pressure ratings available) -10/+90°C (Higher temperature ratings available) Connection options Signals Electrical connection ¾”, 1”,...