DISPLAY SPECIFICATIONS RE11TEMPERATURE CONTROLLER • 4+4 digits, 7 segment LED Dual high-contrast Display. • Universal input for TC/ RTD sensors. • Auto-Tuning / Self Tuning. • Field selectable Control Output (Relay or SSR). • Auxiliary Output: Relay. FUNCTIONAL SPECIFICATIONS Display 4+4 digits, 7 Segment LED dual display Height of Upper Display : 15.3mm Height of Lower Display : 8mm LED Indication 1. Output 1 ON T : Auto tune 2. Output 2 ON S : Dwell timer INPUT SPECIFICATIONS Control Action Proportional Band (P) Integral Time (I) Derivative Time (D) Cycle Time Hysteresis Width Manual Reset Value 1) PID Control with auto tuning (fixed 1°for R & S type TC input) Indication Accuracy For J, K & T inputs : 0.25% of F.S. ±1° For R & S inputs : 0.5% of F.S. ±2o (20 min of warm up time for TC inputs) For RTD inputs : 0.1% of F.S. ±1o (F.S. = Full Scale) Heat-cool Control Action Proportional Band-Cool Cycle Time-Cool Dead Band Programmable from set point low limit to set point high limit. Temperature Unit °C / F selectable Settings for Alarm Output Modes OUTPUT SPECIFICATIONS AUXILIARY SUPPLY SPECIFICATIONS Control Output (Relay or SSR user selectable) Relay contact (SPST) 5A resistive @ 250V AC / 30V DC Auxiliary Output Relay Contact (SPST) 5A resistive @ 250V AC / 30V DC ENVIRONMENTAL SPECIFICATIONS Temperature Operating : 0 to 50oC MECHANICAL SPECIFICATIONS Mounting Panel Protection rating IP50 from the front side

Ordering Information PRODUCT CODE RE11 SUPPLY VOLTAGE Accessories (Optional) Adapter plate 1) AP7248: Plastic adapter plate, used to mount 1/16 DIN (cutout size 48 x 48) Instrument into existing (72 x 72) cutout size. 2) AP9648: Plastic adapter plate, used to mount 1/16 DIN (cutout size 48 x 48) Instrument into existing (96 x 96) cutout size. 3) AP4896-4848-G-C : Plastic adapter plate, used to mount 1/16 DIN (cutout size 48 x 48) Instrument into existing (48 x 96) cutout size. Mounting Accessories (Supplied with units) Input Sensor Ranges Compliance Applicable EMI / EMC Standards Product Standard...