KD6 - SCREEN RECORDERFEATURES iNPUTS OUTPUTS GALVANiC iSQLATiON TECHNICAL DATA 2 or 6 inputs; 0 V d.c. - inactive binary input, 5...24 V d.c. - active binary input Binary inputs

KD6 - screen recorder rated operating conditions Preheating time Supply voltage Ambient temperature Operating position without condensation Additional error (in % of the basic error) from ambient temperature change: < 50% / 10°C Safety and compability requirements Electromagnetic compatibility Isolation between circuits Polution level Installation category Maximal phase-to-earth voltage Altitude a.s.l. noise immunity noise emissions basic 2 III • for supply circuit and relay outputs 300 V • for measuring input 50 V • for circuits of RS-485, Ethernet, analog outputs: 50 V < 2000 m data visualisation...

KD6 - screen recorder recordeR configuration with FREE eCon Software ability to configure and update of KD6 with free eCon software (via RS-485 or Ethernet interface) Saving the configuration to a file and loading to many of the same recorders or creating a backup copy. remote readout of parameters throug Ethernet: WWW server, FTP www server for remote reading of current measurement data; FTP server for downloading archived data in CSV files

ORDERING CODE xx I/O module - slot X*: 4 x programmable measuring inputs without module 6 x relay outputs 4 x relay outputs + 4 x binary inputs separated from each other 4 x analog outputs + 4 x binary inputs with common ground 4 x programmable measuring inputs Supply voltage: Acceptance tests: * all possible variants for slot X are described in the user manual in chapter 11 ** only after agreeing with the manufacturer KD6-19 enSifam Tinsley Instrumentation Ltd 1 Warner Drive, Springwood Industrial Estate, Braintree, Essex CM7 2YW Contact No. : +44 (0) 1376 335271 Email: [email protected]...