TEST & MEASUREMENT www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers kWh Energy Meters Analogue Panel Meters Shunts GAMMA 36 DIGITAL MULTIMETER Digital Bargraphs Digital Multimeters Protection Relays Synchroscope Series Rotary Switches Power Supplies Test & Measurement SUBJECT TO CHANGE WITHOUT NOTICE This datasheet superseded all previous versions – please keep for future reference

Product Features: GAMMA 36 - Digital Multimeter ➜ Direct and alternating voltages from 10 μV ... 1000V ➜ Direct and alternating currents from 10 μA ... 10.00A ➜ Resistance from 0.1Ω...60.00M Ω with zero correction ➜ Logic Frequencies from 0.01Hz ... 1MHz Approx ➜ Diode measurement and continuity testing ➜ Hold measurement ➜ Relative measurement ➜ Duty cycle (%) measurement ➜ Temperature measurement with K type Thermocouple ➜ Backlit Facility ➜ NCV (Non Contact Voltage Detection) ➜ Auto Power Off Gamma 36 digital multimeter is suited for universal, general applications in the electrical and electronics...

Diode and continuity testing This provides for the testing of the polarity of diodes, as well as inspection for short-circuits and circuit interruptions. In addition to the display, resistance of less than approx 50Ω are indicated with an acoustic signal. Overload warning An acoustic signal occurs when measuring AC voltage>1000V, DC Voltage>1000V, AC/DC current>6A. Energy saving circuit (Auto Power Off) The instrument is switched off automatically, if none of the operating elements have been activated for about 15 minutes. Protective cover for rough operating conditions A protective cover of...

Reference conditions for accuracy Issue 1.0 TEST & MEASUREMENT 3

Influence Quantity Issue 1.0 TEST & MEASUREMENT 4

Issue 1.0 TEST & MEASUREMENT 5

(^) PC-LINK NCVhFE □ ESI Effl-EEl 1. Digital display with dot and polarity. 4 Continuity test display: Buzzer symbol appears when acoustic signal is switched on. 5. Display for diode measurement. 6. Measurement unit display. 7. Display for automatic measuring range selection. 8. Display for selected type of Voltage/Current (AC or DC). 9. Display for overload value “OL”. Issue 1.0 TEST & MEASUREMENT 6

Fuse for ranges up to 400 mA Fuse for 10 A range 1.6 A / 600V; 6.3mm x 32mm Dimensions With Holster Without Holster Weight 1 Copy Operating Instructions 1 Instruments: IP 52 Connector sockets: IP 20 W x H x D 86mm x 188mm x 53mm 79mm x 174mm x 38mm Approx. 0.480Kg with battery Protective Case (Holster). Issue 1.0 TEST & MEASUREMENT 7

Contact Sifam Tinsley Instrumentation Ltd 1 Warner Drive Springwood Industrial Estate Braintree Essex CM7 2YW Tel: 01376 335271 Email: [email protected] www.sifamtinsley.co.uk TEST & MEASUREMENT