AI is a range of pyramidal absorbers made of carbon loaded polyurethane foam, sealed in plastic coating to guarantee the waterproofness of the material. AI absorbers are designed for outdoor uses (covering of metallic areas, reduction of radar cross section ...) REFLECTIVITY PERFORMANCES MINIMUM REFLECTIVITY OF AI in dB for incidence angles close to the normal Type All rights reserved. Information presented in this document are subject to modifications MAIN CHARACTERISTICS Matrix: 90 % open cell. Polyurethane foam Impregnating agents: carbon, binder, fire retardant. Colours: blue (other colours available upon request). Max. service temp.: [-70 ; +50]°C Power handling: 0.13 W/cm² max continuous. Plastic coating fire resistance: M2 (upon request). DIMENSIONS Standard sizes: 610 X 1220 mm (other sizes available on request) METHOD OF USE AI absorbers can be fitted with either non metallic eyelet placed into the waterproof material or using adhesives. These data are the result of tests performed in our laboratory. They are considered to be the best of our knowledge. The use of the material and the specification of the performances are made under the whole responsibility of users who should ensure themselves that the material is suitable for their purposes. SIEPEL SAS – ZA de Kermarquer - 56470 La Trinité-sur-Mer FRANCE Ph.+33(0)2 97 55 74 95- Fax +33(0)2 97 55 84 55 – www.siepel.com International Sales Manager: Matthieu GUESNÉ [email protected] Domestic Sales Manager: Stéphane TANGUY [email protected] Customer Relations Manager: Stéphanie JÉGAT [email protected] –