API absorber is a rigid flat absorber which can be walked upon. API absorbers are used to provide access to working areas within an anechoic chamber. All rights reserved. Information presented in this document are subject to modifications REFLECTIVITY PERFORMANCES MINIMUM REFLECTIVITY OF API in dB Type MAIN CHARACTERISTICS Matrix: 90% open cells polyurethane foam and rigid polymer Impregnating agents: carbon, binder, fire-retardant. Maximum service temperatures: - 70°C and 100°C. Sizes: 1220x610 mm Power handling: 0.13 W/cm² max CW. Plastic coating Fire resistance: M2 (on request) Maximum load-bearing capability: 200 kg/m² or 90 kg/ft² METHOD OF USE API absorbers are put on a flat floor. These data are the result of tests performed in our laboratory. They are considered to be the best of our knowledge. The use of the material and the specification of the performances are made under the whole responsibility of users who should ensure themselves that the material is suitable for their purposes. SIEPEL SAS – ZA de Kermarquer - 56470 La Trinité-sur-Mer FRANCE Ph.+33(0)2 97 55 74 95- Fax +33(0)2 97 55 84 55 – www.siepel.com International Sales Manager: Matthieu GUESNÉ [email protected] Domestic Sales Manager: Stéphane TANGUY [email protected] Customer Relations Manager: Stéphanie JÉGAT [email protected] –