Order Overview SITOP
2Pages

Order overview SITOP Power Supply Three reasons for SITOP: reliability, efficiency, and integration siemens.com/sitop Order overview SITOP – Regulated power supplies, expansion modules, and DC UPS Product Rated input voltage (range) Short description Advanced power supplies SITOP PSU8600 – The power supply system for digitalization and Industry 4.0 PSU8600 1AC basic unit • 24 V DC/20 A/4 x 5 A Modular system: CNX8600 expansion module • 24 V DC/4 x 5 A Supply from basic unit PSU8600 via connection ”System Clip Link“ • Compact basic units with 1 or 4 outputs, each overload monitored • Expandable without wiring effort: up to four CNX8600 modules and two BUF8600/UPS8600 modules • Expansion module for up to 36 outputs • CNX8600 8 x 2.5 A with NEC Class 2 • Outputs individually adjustable: voltage (4 ... 28 V DC) and current • DC UPS module with up to five battery modules in lead or lithium iron phosphate technology for protection against long network failures • Two Ethernet/PROFINET ports for optimum integration in plant automation • Integrated webserver and OPC UA server • Simple engineering as well as comprehensive monitoring and diagnosis in TIA Portal • Support of energy management due to capturing of energy data and selectively switching off the outputs UPS components • DC UPS module UPS8600 • Battery module BAT8600 Pb 60 x 125 x 150 6EP4197-8AB00-0XY0 Energy exchange with UPS8600 SITOP PSU8200 – Technology power supply for demanding solutions 24 V DC/5 A, PSU8200 • Wide-range input • Efficiency levels of up to 95% • Extra power feature (1.5 x Irated for 5 s/min) for brief operational overload • Power Boost (3 x Irated for 25 ms) for triggering protective equipment • Switchable characteristic curves for parallel operation and short-circuit protection • Operation status indicated by 3 LEDs • Signaling contact “DC ok” • Output voltage adjustable • 24 V power supply units expandable with add-on modules and DC UPS • 36 V and 48 V versions enable smaller cross-sections of the load supply lines Standard power supplies SITOP PSU6200 – The all-rounder power supply for a wide variety of applications 12 V DC/2 A, PSU6200 24 V DC/1.3 A, PSU6200 • Robust wide range input AC and DC, 3-phase devices also applicable for continuous operation with 2 phases • Space-saving, narrow design • High efficiency up to 96% • High overload capacity thanks to extra power (1.5 x Inom for 5 s) and constant current behavior, permanent overload capacity (1.2 x Inom) up to 45 °C ambient temperature • Push-in terminals for fast connection • From 3.7 A: LED and signaling contact “DC ok” • From 24 V/10 A and 48 V/5 A: diagnostics monitor for overload and service life via LEDs, diagnostics interface signals all the relevant device and operating data, active PFC for low reactive current component • Variants with conformal coating with certifications according to ATEX, IECEx, FM, and CCC for use in hazardous areas zone 2 • Expandable with all SITOP add-on modules SITOP smart – Powerful standard power supply 12 V DC/7 A, PSU100S 12 V DC/14 A, PSU100S • Space-saving, slim design • PSU100S with automatic range switch over 120/230 V AC • Extra power (1.5 x Irated for 5 s) for brief operational overload • Permanent overload capacity (1.2 x Irated) to 45 °C ambient temperature (24 V devices) • Green LED and signaling contact “Output voltage ok” • Adjustable output voltage up to 28 V DC or 15.5 V DC (12 V devices) • Expandable with redundancy module, selectivity/diagnostics module, buffer module, and DC UPS Basic power supplies SITOP PSU4200 – power supply with fresh power for basic applications 24 V DC/3 A, PSU4200 • For industrial applications with basic requirements • LED power monitor • Adjustable output voltage • Up to 93% efficiency • Active PFC in 20 A devices for low degree of idle current and inrush current • Temperature range −25 ... +70 °C • Push in connection technology • Expandable with all SITOP add-on modules LOGO!Power 4th generation – Flat power supply for distribution boards in LOGO! 8 design 5 V DC/3 A 5 V DC/6.3 A • Flat power supplies with widths from 18 mm (1 division unit) • Wide-range AC and DC input • Voltage measuring point for output current • Up to 90% efficiency over entire load range • Very low no-load losses of < 0.3% • Constant current and power reserve for loads with high inrush currents • Flexible rail or wall mounting • Green LED for “Output voltage ok” • Adjustable output voltage • Temperature range −25 ... +70 °C Power supply in SIMATIC design 24 V DC/2.5 A, PM1207 • Compact power module for SIMATIC S7-1200 with automatic range switchover • Load power supply of SIMATIC S7-1500 in slimline design with automatic range switch over and extra power (1.5 x Irated for 5 s/min) • Power supply in IP67 degree of protection for electronics/sensors and load voltage for the SIMATIC ET200pro • Stable output voltage from fluctuating DC voltage • Ideal for battery-operated applications such as driverless transport vehicles • PSU3400 in narrow metal housing, with reverse polarity protection and high efficiency up to 93.5% • PSU3400 24 V DC/24 V DC for compensating voltage losses with long cables • PSU3400 uni with universal input for 24 ... 240 V DC or 100 ... 240 V AC • Power supply for SIMATIC ET 200SP distributed I/O, flat design, with automatic range selection, extra power (1.5 x Irated for 5 s/min), current monitor, and plugs for 3 load circuits DC/DC converter

Order overview SITOP – regulated power supplies, expansion modules, and DC UPS Rated input voltage (range) Short description Power supplies in special design, for special uses 12 V DC/3 A, PSU100D NEW 100 … 240 V AC (90 … 264 V AC) • Low-cost power supply for wall mounting in various installation positions • Rugged aluminum enclosure • Green LED for “Output voltage ok” • Adjustable output voltage • Temperature range from −25 to +70 °C • Rugged metal enclosure in IP67 degree of protection for distributed use • Signaling contact and LED for operation status • NEW: PSU100P output with metric...