Desigo Control Point High-quality touch panels for technical on-site operation of plants as well as room operation. • Optimized for local on-site operation of the Desigo building automation and control system • Integrated web server with HTML5.0 interface • Generic operation and monitoring of plant functions (alarms, schedulers, calendars, setpoint changes, display of actual values, etc.) • Offline engineering of customized graphics with ABT site • Compact design featuring a low installation depth for mounting in panel doors • Wall mounting with installation frames for PXM40.E, PXM50.E (ordered separately) • High-resolution, capacitive touch displays (landscape) • LED to display alarms on an inactive screen • Operating voltage AC 24 V, DC 24 V, or Power over Ethernet (PoE) (PXM40.E and PXM50.E) Smart Infrastructure

BACnet devices Touch panels are highly flexible and scalable: ● Plant operation by technicians ● Operation of various room environments by the end user. ● Examples: Offices, conference rooms, or even entire floors The devices are suitable for installation in panel doors Mounting frames are available for wall mounting (ordered separately): ● PXM40.E and PXM50.E (flush mounting) ● PXM30.E (surface mounting) Functions Example for a plant graphic 2 Siemens Smart Infrastructure

Settings Different settings are available, however, for user-friendly operation of the touch panel. They can be edited after login. For details, see "Desigo Touch Panel client commissioning", A6V11604303. The mounting set / wall-mount frames must be ordered separately. Siemens Smart Infrastructure

Product documentation Engineering For additional information on cable lengths, topology, etc.: See Desigo Control Point Basic documentation, A6V11170804 Mounting Mounting types Touch panels are designed for • Mounting in the panel door • Installation in cavity walls using separately ordered installation frames (PXA.V40. PXA.V50) • Wall or panel door mounting using separately ordered mounting set (PXA.S30) Mounting instructions Mounting installations are printed on the unit's packaging material. Cut outs for panel installation and wall mounting See "Dimensions". Power is connected to a plug-in...

LED display (front side) Maintenance Cleaning Touch panels are maintenance free. Dirt on the display can be cleaned using off-the-shelf display cleaners for smart phones, a moist rag, and/or off-the-shelf microfiber cloth for monitors or glasses. Recommended products: • Lysol towel • Clorex towel • Water with 2% alcohol • Damp microfiber cloth • H2O2 hydrogen peroxide • Sterillium® Classic Pure Firmware upgrade You can update the firmware with ABT Site. Repair The devices cannot be repaired. The entire unit must be replaced. Siemens Smart Infrastructure The device is considered an electronic...

Technical data Power supply Plug Data rate (USB 2.0 full speed) Protective switch against surges and over current Galvanic isolation of system neutral 1 Type B (device) 12 Mbps Yes No Ethernet interface Plug Interface type Bit rate Protocol Galvanic isolation of system neutral 1 RJ45, screened 100BASE-TX, IEEE 802.3 compatible 10/100 Mbps, autosensing BACnet over UDP/IP Yes Screw terminals, plug-in Siemens Smart Infrastructure

Siemens Smart Infrastructure

Connection terminals, service button Reset / series B and higher: Service button Dimensions All dimensions provided in mm and inches. PXM30.E Mounting kit PXA.S30: see data sheet A6V11646070 8 Siemens Smart Infrastructure

Siemens Smart Infrastructure

Siemens Smart Infrastructure

Trademarks Oracle and Java are trademarks or registered trademarks of Oracle Inc. Siemens Smart Infrastructure

Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 12 Siemens Smart Infrastructure Document ID A6V11664137_en--_e 2020-01-08 Edition © Siemens Switzerland Ltd, 2019 Technical specifications and availability subject to change without notice.