Group: SIEMENS
Catalog excerpts
Fire control panel for Railway • Centralize Fire Information and Manage Fire Devices and Fire Protection of the Train • Approved Safety Integrity Level 2 • Ethernet and/or dry contact interface to the train management system (TCMS) • Ethernet interface to the Configuration Management Tool (CMT) • Microprocessor-controlled panel for the connection of one loop of up to 32 FDOOT801 Multi-sensor Fire Detectors. • Railway compact, rack mountable equipment (3U, 24TE) • Configurable Fire Panel with auto-addressable loop • Configuration with up to 8 fire detection zones and up to 16 protection zones • Centralized System with simplified cabling (daisy chain loop). • Flexible and easy system configuration with enhanced combination for train platforms flexibility • Rearmament, Protection Inhibition, Test functions controlled through train lines inputs • Power supply output for one complete loop of 32 FDOOT801 • 4x Inputs for Linear Heat Detector, or Manual Call Point • 3x Safety Fire Detection Dry Contacts outputs (Warning, Alarm, Fault,) • 1x Safety Fire Protection Dry Contacts output Building Technologies
Open the catalog to page 1System overview The FC801 control panel can be configured to fit one of the two following train architectures: Trailer architecture (one System per car) Consist Architecture (one System for several cars)
Open the catalog to page 2Configurable System size - Up to 32 FDOOT801 devices (smoke or T° detector) Up to 68 Fire Peripherals inputs (LHD, HD, Manual Call Point,..) Up to 33 Fire Protection Outputs (lights, sounders, extinguishing devices …) Up to 32 Fire protection zone Inputs monitoring / inhibition Up to 8 Fire Detection Zones Up to 16 Fire Protection Zones The Configuration Management Tool FXS8002 permits the system to be adapted to specific customers' requirements. It allows to mainly configure the links between: - detection inputs with detection zones, - protection outputs with protection zones, - detection...
Open the catalog to page 3FC801 is a compact fire control panel that can process signals from FDOOT801 devices and from its own inputs. It provides 4 monitored inputs for connection of LHD (Linear Heat Detector), or Manual Call Point (MCP). It centralizes Fire Events with synthetic safety I/O indications: - System Fire Alarm: - 1 ALARM dry contact for Fire Alarm Indication (safety output) - 8 dry contacts for Fire Alarm Zones Indication - System Monitoring: - 1 FAULT dry contact for System Failure Indication (Inoperative System) - 1 WARNING dry contact for Component Failure Indication (Degraded performance mode) It...
Open the catalog to page 4Technical data Main voltage Power supply voltage for FDOOT801 Connectable detector series Number of lines – Can bus loop – Configuration and Maintenance – Train communication Number of looped addressing devices Integrated inputs/outputs – Fire Safety Relay Output – Alarm – Fault – Warning – Fire Safety Protection Relay Output – Monitored Inputs (LHD, HD or MCP inputs) – Zones indication discrete Outputs – Train line discrete Inputs – INH (Inhibition) – Rearm (Rearmament) – Test Man interface unit Operating temperature Storage temperature Weight Color 1700 g colorless anodized aluminum...
Open the catalog to page 5Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41 724 24 24 www.siemens.com/buildingtechnologies Document no. © Siemens Switzerland Ltd, 2015 Data and design subject to change without notice. Supply subject to availability.
Open the catalog to page 6All Siemens Fire Safety catalogs and technical brochures
-
FDOOT221, FDO221, FDT221
6 Pages
-
FC360
16 Pages
-
FC721
16 Pages
-
FC722
22 Pages
-
FC2020 Fire control panel
22 Pages
-
Sinorix
10 Pages
-
Cerberus PRO
340 Pages
-
FDCL221
6 Pages
-
FC2040
22 Pages
-
FC2030
20 Pages
-
FC2020
22 Pages
-
FC1002, FC1004 Control units
4 Pages
-
Cerberus PRO
2 Pages