Line separator, addressed (FDnet/C-NET) Automatic line separator Formation of T-branches in the FDnet/C-NET Status indicator with LED Communication via FDnet/C-NET (addressed individually) Installation in intermediate distributor or fire control panels

Properties Features ● Protected electronics ● Integrated alarm indicator for signaling the line separation Eco-friendly ● Environmentally friendly processing ● Reusable materials ● Electronic parts and synthetic materials can be easily separated Functions ● ● ● Disconnects the affected bus area in the event of a short-circuit in the FDnet/C-NET so that the area unaffected by the short-circuit continues to function. The line separator has 2x two screw terminals for the detector line. The status of the line separator is indicated by a yellow LED. Observe national guidelines and regulations. ● Fields...

Type Overview Type Order number Input module incl. 8 resistors, 2 mounting feet Accessories for the line separator FDCL221 Type Order number Product documentation Document ID Equipment overview Sinteso™ Detector system FD20 List of compatibility (for 'Sinteso™' product line) List of compatibility (for 'Cerberus™ PRO' product line) Technical manual Line separator FDCL221 Installation Line separator FDCL221 Related documents such as environmental declarations, CE declarations, etc., can be downloaded at the following Internet address: https://siemens.com/bt/download Smart Infrastructure

Notes Mounting Mounting options ● Directly on a U-rail TS35 ● With a cable tie on the mounting hole ● With a screw on the mounting hole 4 FDnet/C-NET detector line 5 At least 3 sets of terminal blocks The device is considered an electronic device for disposal in accordance with the European Guidelines and may not be disposed of as domestic garbage. ● Dispose of the device through channels provided for this purpose. ● Comply with all local and currently applicable laws and regulations.

Technical data FDCL221 Operating voltage Operating current (quiescent) Operating temperature Operating temperature tested according to EN 54-17 Storage temperature Communication protocol Transparent matt System compatibility ● FDnet ● C-NET Dimensional drawings Line separator FDCL221 500 Smart Infrastructure

Siemens Schweiz AG; Theilerstrasse 1a CH-6300 Zug Technical data: see doc. 007063 FDCL221- Short-circuit isolator for use in fire detection and fire alarm systems installed in buildings. 305/2011/EU (CPR): EN 54-17 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581 The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC), which is obtainable via the Customer Support Center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download DoP No.: 0786-CPR-20449; DoC No.: CED-FDCL221 Issued by Siemens...