Compact, pre-assembled fire control panel with integrated, user-friendly operating unit. • Fire control panel for a maximum of 252 addresses • Optional, integrated single-sector extinguishing • Can be used as a standalone version or networked with up to 64 stations, such as control panels and terminals • Redundant network node with degraded mode operation according to EN 54 • Emergency power supply for emergency operating time of up to 72 hours • Detection and automatic importing (auto-configuration) of all FDnet devices, ready for operation immediately • Flexible configuration of complex applications and controls • Configuration data can be uploaded/downloaded via remote access • Extensions: Printer, key switches, LED indicators • Time and situation-dependent changeover of detector parameter sets Building Technologies Control Products and Systems

EThe diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. System overview (Sinteso Connect 1 Ijli (z) Router + Firewall System overview Building Technologies Fire Safety

You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'. Networking of fire control panels The diagrams have been simplified and do not include additional network hardware or security components. Permissible applications are described in the A6V101039125 Network Security Guidelines document. Contact your Siemens IT security expert for more information. Up to 32 control panels and terminals can be linked to form one FCnet network. If the FCnet network is connected to a danger management...

Building Technologies Fire Safety

An optical FCnet/LAN network allows up to 14 sub-nets with up to 16 stations to be operated in one network. A maximum of 64 stations is supported in total. (Sinteso Connect Cluster Cluster (FCnet/SAFEDLINK) Backbone You will find a detailed labeled version of the diagram above along with further information in the A6V10906627 planning guide, see chapter 'Product documentation'. Building Technologies Fire Safety

Control panels General features and functions • Fast Ethernet interface for a heterogeneous network • Process signals from Sinteso • Siemens danger management system can be connected • Slots for RS232 and RS485 serial interfaces • Floor repeater devices, alarm devices, and mimic displays on the FDnet detector line • All detector lines are monitored for ground faults. • Integrated degraded mode function • Freely configurable, time-dependent controls with optional weekly switching programs • Time and situation-dependent changeover of detector parameter sets • Controls for synchronous activation...

Housing (Standard) Detector line (FDnet) • 252 addresses Properties • Operating unit (+LED indicator) • 70 W power supply • Max. battery capacity 12 Ah Options of the operating unit • Key switch (Kaba) FTO2005-C1 • Key switch (nordic) FTO2006-B1 Detector line (FDnet) • 252 addresses Properties • Operating unit • Operating add-on (empty) • 150 W power supply • Max. battery capacity 25 Ah • 1 flooding zone (optional) Options of the operating unit • Event printer FTO2001-A1 • Key switch (Kaba) FTO2005-C1 • Key switch (nordic) FTO2006-B1 • Operating add-on (2xLED indicator) FCM2038-A2 • Operating...

You will find information on the integrated extinguishing system and the individual extinguishing components that are available in a separate data sheet with the document ID 'A6V11480005'. Operating add-on (4xLED indicator) Optional operating add-on with 96 indicator groups with one red/green + one yellow LED each FCM2038-A2 Operating add-on (2xLED indicator) Optional operating add-on with 48 indicator groups with one red/green + one yellow LED each Building Technologies Fire Safety

Building Technologies Fire Safety

This fire control panel is ideal for smaller applications, e.g., for use in workshops or hotels. Thanks to the flexible networking options, the Station can also be used for large-scale sites. Function elements Operating unit The following elements are available on the operating unit: • CPU module and electronics • Ethernet connection • Slots for RS232 and RS485 modules and network modules (SAFEDLINK) • Space for 'Kaba' or 'nordic' key switch • Space for event printer (depending on version) • Peripheral data bus connection for optional LED modules Periphery board The following elements are available...

Operation Each control unit has an integrated operating unit. The control panel can also be operated via a separate FT2040 or FT2080 (Touch) fire terminal. You will find details and more information in product data sheet 009386. Building Technologies Fire Safety

Building Technologies Fire Safety

Building Technologies Fire Safety

Building Technologies Fire Safety

Type Overview Housing (Standard) Housing (Comfort) Order number Number of FDnet addresses Building Technologies Fire Safety

You will find information on the integrated extinguishing system and the individual extinguishing components that are available in a separate data sheet with the document ID 'A6V11480005'. Building Technologies Fire Safety

Auxiliary power supply Building Technologies Fire Safety

Product documentation Related documents such as the environmental declarations, CE declarations, etc., can be downloaded from the following Internet address: https://siemens.com/bt/download Technical data on specific applications are valid only together with Siemens products listed under "Equipment combinations". Siemens rejects any and all warranties in the event that third-party products are used. Building Technologies Fire Safety